Вопрос по Spanning Feature для контроллера Mylex A170

Конфигурирование, планирование RAID систем, возможности, технологии, теория. Qlogic, LSI Logic, Adaptec ...

Модераторы: Trinity admin`s, Free-lance moderator`s

Ответить
Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Вопрос по Spanning Feature для контроллера Mylex A170

Сообщение Zirro » 26 сен 2003, 17:56

Задумал я модернизировать сервер (конфигурацию можно посмотреть здесь). Но при этом выяснилось, что достать 18Gb диски практически невозможно, но есть возможность по сходной цене взять 36Gb HDD. И я озадачился вопросом: как "подружить" диски разной ёмкости? И вот в описании к моему контроллеру я наткнулся на упоминание некоей "Spanning Feature". И, насколько я понял, при помощи этой feature можно создавать логические диски из массивов разной ёмкости.
В общем в описании всё довольно неплохо выглядит:
Build an array (АО) from the three 4.0 GB drives, and build another array (Al) from the three 2.0 GB drives, with spanning. I will now have the full 1 8.0 GB of physical capacity in both АО and Al with which to define logical drives. Therefore, the largest logical drive I can define would make use of the full 18.0 GB in both arrays.
А как всё это на практике? Кто-нибудь проделывал такое?

Аватара пользователя
gs
Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Сообщение gs » 26 сен 2003, 19:30

Блин, ну не пробовал я! Раньше такое было невозможно, но с современными прошивками я не озадачивался.
Пытаюсь найти майлекс для эксперимента...
Народ в Питере - может у вас на складе остался - проверьте плиз.

Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Сообщение Zirro » 26 сен 2003, 19:36

М-да жаль :( . Но неужели такая "фишка" есть только на Mylex'ах?

Аватара пользователя
gs
Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Сообщение gs » 26 сен 2003, 19:39

Я так понял, что задача в том, что у Вас майлекс и надо на нем этого добиться.
А вообще, майлексы с последними прошивками были самыми продвинутыми в плане набора функций.

Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Сообщение Zirro » 26 сен 2003, 19:47

Да, задача именно такая. Но, я надеюсь, это не единственный контроллер на котором есть такая "фишка". Так может, за не имением лучшего, хотя б на других контроллерах попробовать? Хотя, крайне желательно, иметь какие-нибудь отзывы об использовании этой "особенности" именно на Mylex A170.

Аватара пользователя
gs
Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Сообщение gs » 26 сен 2003, 19:51

Попробую даже ради собственного интереса.
Только надо ли это в данном случае? Ведь замена контроллера обойдется как покупка двух винтов по 36ГБ.

Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Сообщение Zirro » 26 сен 2003, 19:56

Нет, о замене контроллера даже речи не идёт. Просто, пока нет никаких данных, приходится ориентироваться хотя бы на "косвенные улики" :wink: .

Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Сообщение Zirro » 08 окт 2003, 15:43

М-да, прошло почти 2 недели - новостей похоже нет :(

Аватара пользователя
CyberDrake
free-lance moderator
Сообщения: 338
Зарегистрирован: 23 авг 2002, 10:39
Откуда: Санкт-Петербург
Контактная информация:

Сообщение CyberDrake » 09 окт 2003, 14:36

спаннинг делал, все работало
но вот диски были одинаковые
думаю, раз написано в manual, дожно работать - Mylex с такими вещами ни разу не подводил

Аватара пользователя
gs
Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Сообщение gs » 09 окт 2003, 15:15

Вы не поверите, но у нас из майлекса остались только пара штук, что в наших серверах стоят (типа под гарантию). Так что не бейте сильно - не на чем проверить.
А майлекс действительно не врал никогда - написано, значит работает. И про производительность всегда честно писал (правда ему скрывать было не резон - все было круто :)).

Zirro
Advanced member
Сообщения: 235
Зарегистрирован: 27 авг 2002, 14:03
Откуда: Киров
Контактная информация:

Сообщение Zirro » 09 окт 2003, 16:19

CyberDrake писал(а):спаннинг делал, все работало
но вот диски были одинаковые
думаю, раз написано в manual, дожно работать - Mylex с такими вещами ни разу не подводил
Обнадежили, спасибо :) .Только можно чуть поподробней:
1. процедуру "делания" спаннинга.
2. что в итоге получилось
3. это проводилось для эксперимента или для реального использования?
gs писал(а):Вы не поверите, но у нас из майлекса остались только пара штук, что в наших серверах стоят (типа под гарантию). Так что не бейте сильно - не на чем проверить.
А я уж думал Вы по меня забыли, а всё оказалось проще.

Если интересно: корпус я уже купил, диски (по 36Г) уже в пути, так что "дальше отступать некуда" - будем экспериментировать.

Аватара пользователя
CyberDrake
free-lance moderator
Сообщения: 338
Зарегистрирован: 23 авг 2002, 10:39
Откуда: Санкт-Петербург
Контактная информация:

Сообщение CyberDrake » 10 окт 2003, 14:24

Вот собственно текст из Help GAM Transistion Tool, для обычного GAM то же самое, только файл, которы надо править называется gam2cl.ini(извините, переводить было лень :green: ):

Spanning

Spanning allows you to configure multiple drive packs or parts of multiple drive packs as one system drive. This means that space is used from the first array to the last identical array.
A drive pack is a group of individual disk drives (preferably identical) that are logically tied to each other and are addressed as a single unit. In some cases this may be called a drive "pack" when referring to just the physical devices.
All physical devices in a drive group should be the same size; otherwise, each of the disks in the group will have the capacity of the smallest member. The total size of the drive group will be the size of the smallest disk in the group multiplied by the number of disks in the group. For example, if you have four disks of 400MB each and one disk of 200MB in a pack, the effective capacity available for use is only 1000MB (5x200), not 1800MB.

Drive packs or groups have the following properties.
  • From one to sixteen disk drives included in an individual drive pack or group.
    The drive pack can include physical disk drives located on different drive channels.
    The number of disk drives in a drive pack determines the possible RAID level.
fter physical disk drive packs are defined, one or more system drives may be created from drive packs. System drives have the following properties:

· In GAM TT more than one system drive can be defined on a single drive pack; a system drive can also span 16 packs.

· The minimum size of a system drive is 8MB. The maximum is 2 TB.

· Up to 32 system drives can be created. Each system drive has its own write policy (write-back or write-through).

Enabling Spanning in GAM TT

1 Using a text editor application (such as Notepad), open the GAM TT2cl.ini file.

2 Scroll to the Enable_System_Drive_Span=0 parameter and set the parameter to 1 (default value =0).

3 Save and close the GAM TT2cl.ini file.

Configuring a Spanned Array

1 Open RAID Assist by clicking Administration->RAID Assist on the menu bar or the RAID Assist icon.
The RAID Assist "Welcome" dialog box displays.

2 Click the Manual Configuration button.

3 Click the Edit Configuration button.
Automatic and Assisted configuration options do not allow spanning.

4 To create a JBOD or RAID0 connect at least four drives of the same size to a controller.
To create a RAID 1, RAID 3, RAID 5, or RAID 0+1, connect at least six drives of the same size to a controller.

5 Select physical drives from the drive packs to create a spanned array. Remember to use the same number of devices in each Array or spanning will not be utilized.

Creating a Spanned Disk Array
Note:

Spanned disk arrays cannot be created across a Private and Shared channel.


1 Click on the Disk Arrays tab.

2 Click on the Add Array button to add the desired number of arrays. Each time you click the Add Array button, an array will be added to your configuration (A1, A2, A3, etc...). For this example, assume that A0 has been configured before adding new arrays.
Multiple drives can be added by holding down Ctrl while clicking drives, then dragging the selected set to a Disk Array section.

3 In the Unused Disk Drives/Global Hot Spares (MB) pane, drag and drop the available disk drives to the appropriate disk array (A0, A1, etc...).

You can now configure the desired number of logical drives.

1. Select the Logical Drives tab to configure your disk arrays into logical drives. At any time while configuring logical drives you can...

· right click a logical drive for random deletion, or

· click the Delete Drive button to delete the last configured logical drive, or

· click the Clear All button to delete all the logical drives and start over.

2. Select a RAID level. Only RAID levels compatible with the current configuration will be available in the list.

3. Type your desired amount of available logical or physical capacity for the logical drives. Set any capacity within the spanned space.

4. Check the Write Cache box if you want this logical drive to use Write Back caching. This improves performance, but puts data at risk. You should have a battery backup unit or uninterruptable power supply if selecting this feature.

5. Check the Init Drive box if you want this logical drive to be fully initialized at the conclusion of the configuration. It is recommended that you check this option (if available), unless the controller is capable of background initialization. If so, and you check the box, you will see a message when you apply the configuration indicating that you can make use of the background initialization support.

6. Select a stripe size.

7. Select a cache line size (Mylex Controllers Only), if enabled. Available settings will depend on the selected stripe size.

8. Click the Add Drive button to register your new logical drive.

9. Repeat Steps 5 - 9 until you have used all of the available capacity.

10. If you accept the configuration as presented, click the Apply button to apply, OR
If you want to change your configuration, click the appropriate tab to return to that screen, OR
If you want to start over, click the Welcome tab or Cancel button.

Ответить

Вернуться в «Массивы - RAID технологии.»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 16 гостей