LSI Megaraid 9260-8i как изменить размер массива?
Модераторы: Trinity admin`s, Free-lance moderator`s
LSI Megaraid 9260-8i как изменить размер массива?
Добрый день!
На сервере установлен RAID контроллер LSI 9260-8i
Изначально был создан RAID 10 из 8 дисков SAS 500Gb
Размер 1,8TB
Через некоторое время диски 500Gb заменил на 2Tb
Cейчас, фактически установлено 8 x 2Тб RAID 10
но размер остался прежним 1.8Тб
Каким образом можно увеличить размер?
На сервере установлен RAID контроллер LSI 9260-8i
Изначально был создан RAID 10 из 8 дисков SAS 500Gb
Размер 1,8TB
Через некоторое время диски 500Gb заменил на 2Tb
Cейчас, фактически установлено 8 x 2Тб RAID 10
но размер остался прежним 1.8Тб
Каким образом можно увеличить размер?
- gs
- Сотрудник Тринити
- Сообщения: 16650
- Зарегистрирован: 23 авг 2002, 17:34
- Откуда: Москва
- Контактная информация:
Re: LSI Megaraid 9260-8i как изменить размер массива?
Chapter 4: WebBIOS Configuration Utility
4.9 Viewing and Expanding a Virtual Drive
Follow these steps to view virtual drive properties:
1. In the Logical view of the device tree, click the Virtual Drive Node.
The Virtual Drive dialog appears.
You can increase the size of a virtual drive to occupy the remaining capacity in a drive group.
2. Select the Expand radio button, and click Go.
The Expand Virtual Drive dialog appears, as shown in the following figure.
3. Enter the percentage of the available capacity that you want the virtual drive to use.
For example, if there are 100 GB of capacity available and you want to increase the size of the virtual drive by 30
GB, select 30 percent.
4. Click Calculate to determine the capacity of the virtual drive after expansion.
5. Click Ok.
The virtual drive expands by the selected percentage of the available capacity.
4.9 Viewing and Expanding a Virtual Drive
Follow these steps to view virtual drive properties:
1. In the Logical view of the device tree, click the Virtual Drive Node.
The Virtual Drive dialog appears.
You can increase the size of a virtual drive to occupy the remaining capacity in a drive group.
2. Select the Expand radio button, and click Go.
The Expand Virtual Drive dialog appears, as shown in the following figure.
3. Enter the percentage of the available capacity that you want the virtual drive to use.
For example, if there are 100 GB of capacity available and you want to increase the size of the virtual drive by 30
GB, select 30 percent.
4. Click Calculate to determine the capacity of the virtual drive after expansion.
5. Click Ok.
The virtual drive expands by the selected percentage of the available capacity.
Re: LSI Megaraid 9260-8i как изменить размер массива?
Вся проблема в том, что нет этой кнопки expand!gs писал(а):Chapter 4: WebBIOS Configuration Utility
4.9 Viewing and Expanding a Virtual Drive
Follow these steps to view virtual drive properties:
1. In the Logical view of the device tree, click the Virtual Drive Node.
The Virtual Drive dialog appears.
You can increase the size of a virtual drive to occupy the remaining capacity in a drive group.
2. Select the Expand radio button, and click Go.
The Expand Virtual Drive dialog appears, as shown in the following figure.
3. Enter the percentage of the available capacity that you want the virtual drive to use.
For example, if there are 100 GB of capacity available and you want to increase the size of the virtual drive by 30
GB, select 30 percent.
4. Click Calculate to determine the capacity of the virtual drive after expansion.
5. Click Ok.
The virtual drive expands by the selected percentage of the available capacity.
- gs
- Сотрудник Тринити
- Сообщения: 16650
- Зарегистрирован: 23 авг 2002, 17:34
- Откуда: Москва
- Контактная информация:
Re: LSI Megaraid 9260-8i как изменить размер массива?
Хм. Возможно он составной массив (рэйд10) не хочет... какие-то ограничения по этому поводу вроде были, не помню...
Как финт ушами можно попробовать прибить массив и пересоздать большего размера с тем же порядком дисков и без инициализации - но это весьма рискованный путь. Я бы просто бэкап-рестор сделал.
Как финт ушами можно попробовать прибить массив и пересоздать большего размера с тем же порядком дисков и без инициализации - но это весьма рискованный путь. Я бы просто бэкап-рестор сделал.
Re: LSI Megaraid 9260-8i как изменить размер массива?
а вы в webbios смотрите или lsi storage manager?grom_av писал(а):Вся проблема в том, что нет этой кнопки expand!
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 32 гостя