RAID 10 из четырех (новых)wd1003fbyx на Adaptec 3805 через некоторое время, после создания, начинает терять диски по непонятным причинам.
Батарейка есть, "write cache" включен, на дисках "write-trough". Массив создавался через полный Clear. Прошивка контроллера и драйвер - последние с сайта адаптека.
Диски отваливаются один за другим, пока LUN из состояния Degraded не рушится полностью. Горячее отключение и (через 5 минут) подключение ничего не дает.
Сначала грешил на корзину SAS743TQ, но при подключении "напрямую" - та-же история. Также пробовал менять контроллер (есть запасной).
Развитие событий (отваливаются 3 HDD)
Код: Выделить всё
24 Апрель 2012 г. 10:19:10 Set the write-cache mode to write through: controller 1, connector 0, device 0, S/N WD-WMAW30654070.
24 Апрель 2012 г. 10:19:17 Set the write-cache mode to write through: controller 1, connector 0, device 1, S/N WD-WMAW30717547.
24 Апрель 2012 г. 10:19:22 Set the write-cache mode to write through: controller 1, connector 0, device 2, S/N WD-WMAW30697013.
24 Апрель 2012 г. 10:19:26 Set the write-cache mode to write through: controller 1, connector 0, device 3, S/N WD-WMAW30733244.
24 Апрель 2012 г. 11:09:52 Physical drive removed: controller 1, connector 0, device 2, S/N WD-WMAW30697013.
24 Апрель 2012 г. 11:09:52 Logical device is degraded: controller 1, logical device 0 ("MUN0").
24 Апрель 2012 г. 11:31:23 Physical drive removed: controller 1, connector 0, device 1, S/N WD-WMAW30717547.
24 Апрель 2012 г. 11:42:41 Physical drive removed: controller 1, connector 0, device 0, S/N WD-WMAW30654070.
24 Апрель 2012 г. 11:42:41 Logical device failed: controller 1, logical device 0 ("MUN0").
Код: Выделить всё
24 Апрель 2012 г. 11:46:00 GMT+03:00
Configuration summary
---------------------------
Server name.....................server.local
Adaptec Storage Manager agent...6.50.00 (18579)
Adaptec Storage Manager console.6.50.00 (18579)
Number of controllers...........1
Operating system................Windows
Configuration information for controller 1
-------------------------------------------------------
Type............................Controller
Model...........................Adaptec 3805
Controller number...............1
Physical slot...................7
Installed memory size...........128 MB
Serial number...................9C491141B47
Boot ROM........................5.2-0 (17342)
Firmware........................5.2-0 (17342)
Device driver...................5.2-0 (17342)
Controller status...............Optimal
Battery status..................Not installed
Background consistency check....Disabled
Copy back.......................Disabled
Controller temperature..........Normal (38C / 100F)
Default logical drive task priorityHigh
Number of logical devices.......1
Number of hot-spare drives......0
Number of ready drives..........0
NCQ status......................Enabled
Phy 0...........................No device attached
Phy 1...........................No device attached
Phy 2...........................No device attached
Phy 3...........................No device attached
Phy 4...........................3.00 Gb/s
Phy 5...........................3.00 Gb/s
Phy 6...........................3.00 Gb/s
Phy 7...........................3.00 Gb/s
Logical device..................0
Logical device name.............MUN0
RAID level......................10
Data space......................1,818 TB
Mirror space....................1,818 TB
Date created....................04/23/2012
Stripe size.....................256K
Interface type..................Serial ATA
State...........................Failed
Additional details..............Impacted
Read-cache mode.................Enabled
Write-cache mode................Disabled (temporary write-through)
Write-cache setting.............Enabled (write-back)
Partitioned.....................Unknown
Protected by hot spare..........No
Bootable........................Yes
Bad stripes.....................No
Segment 0.......................Missing
Segment 1.......................Present: controller 1, connector 0, device 3, S/N WD-WMAW30733244
Serial attached SCSI
-----------------------
Type............................Disk drive
Vendor..........................WDC
Model...........................WD1003FBYX-01Y7B
Serial Number...................WD-WMAW30733244
Firmware level..................01.01V02
Reported channel................0
Reported SCSI device ID.........3
Interface type..................Serial ATA
Size............................931,513 GB
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................24
S.M.A.R.T. warnings.............0
NCQ status......................Enabled
Phy 0...........................3.00 Gb/s
End of the configuration information for controller 1
-------------------------------------------------------
Код: Выделить всё
24 Апрель 2012 г. 12:05:04 GMT+03:00
Configuration summary
---------------------------
Server name.....................server.local
Adaptec Storage Manager agent...6.50.00 (18579)
Adaptec Storage Manager console.6.50.00 (18579)
Number of controllers...........1
Operating system................Windows
Configuration information for controller 1
-------------------------------------------------------
Type............................Controller
Model...........................Adaptec 3805
Controller number...............1
Physical slot...................7
Installed memory size...........128 MB
Serial number...................9C491141B47
Boot ROM........................5.2-0 (17342)
Firmware........................5.2-0 (17342)
Device driver...................5.2-0 (17342)
Controller status...............Optimal
Battery status..................Not installed
Background consistency check....Disabled
Copy back.......................Disabled
Controller temperature..........Normal (39C / 102F)
Default logical drive task priorityHigh
Number of logical devices.......1
Number of hot-spare drives......0
Number of ready drives..........0
NCQ status......................Enabled
Phy 0...........................No device attached
Phy 1...........................No device attached
Phy 2...........................No device attached
Phy 3...........................No device attached
Phy 4...........................3.00 Gb/s
Phy 5...........................3.00 Gb/s
Phy 6...........................3.00 Gb/s
Phy 7...........................3.00 Gb/s
Logical device..................0
Logical device name.............MUN0
RAID level......................10
Data space......................1,818 TB
Mirror space....................1,818 TB
Date created....................04/23/2012
Stripe size.....................256K
Interface type..................Serial ATA
State...........................Degraded
Additional details..............Impacted
Read-cache mode.................Enabled
Write-cache mode................Enabled (write-back)
Write-cache setting.............Enabled (write-back)
Partitioned.....................Yes
Protected by hot spare..........No
Bootable........................Yes
Bad stripes.....................No
Group 0, segment 0..............Present: controller 1, connector 0, device 0, S/N WD-WMAW30654070
Group 0, segment 1..............Inconsistent: controller 1, connector 0, device 1, S/N WD-WMAW30717547
Group 1, segment 0..............Present: controller 1, connector 0, device 3, S/N WD-WMAW30733244
Group 1, segment 1..............Rebuilding: controller 1, connector 0, device 2, S/N WD-WMAW30697013
Serial attached SCSI
-----------------------
Type............................Disk drive
Vendor..........................WDC
Model...........................WD1003FBYX-01Y7B
Serial Number...................WD-WMAW30654070
Firmware level..................01.01V02
Reported channel................0
Reported SCSI device ID.........0
Interface type..................Serial ATA
Size............................931,513 GB
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................8
S.M.A.R.T. warnings.............0
NCQ status......................Enabled
Phy 0...........................3.00 Gb/s
Type............................Disk drive
Vendor..........................WDC
Model...........................WD1003FBYX-01Y7B
Serial Number...................WD-WMAW30717547
Firmware level..................01.01V02
Reported channel................0
Reported SCSI device ID.........1
Interface type..................Serial ATA
Size............................931,513 GB
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Failed logical device segments..Yes
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................0
S.M.A.R.T. warnings.............0
NCQ status......................Enabled
Phy 0...........................3.00 Gb/s
Type............................Disk drive
Vendor..........................WDC
Model...........................WD1003FBYX-01Y7B
Serial Number...................WD-WMAW30697013
Firmware level..................01.01V02
Reported channel................0
Reported SCSI device ID.........2
Interface type..................Serial ATA
Size............................931,513 GB
Negotiated transfer speed.......3.00 Gb/s
State...........................Rebuilding
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................0
S.M.A.R.T. warnings.............0
NCQ status......................Enabled
Phy 0...........................3.00 Gb/s
Type............................Disk drive
Vendor..........................WDC
Model...........................WD1003FBYX-01Y7B
Serial Number...................WD-WMAW30733244
Firmware level..................01.01V02
Reported channel................0
Reported SCSI device ID.........3
Interface type..................Serial ATA
Size............................931,513 GB
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................24
S.M.A.R.T. warnings.............0
NCQ status......................Enabled
Phy 0...........................3.00 Gb/s
End of the configuration information for controller 1
-------------------------------------------------------