Adaptec 5405 и WD HDD. Только 1.5 Gb/s?
Модераторы: Trinity admin`s, Free-lance moderator`s
Adaptec 5405 и WD HDD. Только 1.5 Gb/s?
Здравствуйте.
Обнаружил что на сайте adaptec появилась новая прошивка для 5405. У меня к этому контроллеру подключены 4 диска wd re3 500гб.
И вдруг читаю в этом документе пункт 4.21
http://download.adaptec.com/pdfs/readme ... 2_2012.pdf
4.21 PHY Rate Limitations on Western Digital Hard Drives
To avoid data-phase errors with certain Western Digital hard
drives attached to Adaptec Series 5 controllers, the PHY rate
must be set 1.5Gb/s rather than the maximum rate of 3.0Gb/s.
o For Western Digital WD2002FYPS and WD20EADS hard drives, the
PHY rate is set automatically to 1.5Gb/s.
o You can set the PHY rate manually to Auto (default),
1.5Gb/s, or 3.0Gb/s in the BIOS utility.
NOTE: For Adaptec low-port RAID controllers, the device
properties in ASM and the BIOS utility will continue
to report the maximum PHY rate (3.0Gb/s), not the
reduced rate. For high-port controllers, the PHY rate
is reported correctly.
Это что получается что мне надо принудительно все диски перевести в режим SATA1 150 МБ\С?
Или я что-то не так понимаю?
Обнаружил что на сайте adaptec появилась новая прошивка для 5405. У меня к этому контроллеру подключены 4 диска wd re3 500гб.
И вдруг читаю в этом документе пункт 4.21
http://download.adaptec.com/pdfs/readme ... 2_2012.pdf
4.21 PHY Rate Limitations on Western Digital Hard Drives
To avoid data-phase errors with certain Western Digital hard
drives attached to Adaptec Series 5 controllers, the PHY rate
must be set 1.5Gb/s rather than the maximum rate of 3.0Gb/s.
o For Western Digital WD2002FYPS and WD20EADS hard drives, the
PHY rate is set automatically to 1.5Gb/s.
o You can set the PHY rate manually to Auto (default),
1.5Gb/s, or 3.0Gb/s in the BIOS utility.
NOTE: For Adaptec low-port RAID controllers, the device
properties in ASM and the BIOS utility will continue
to report the maximum PHY rate (3.0Gb/s), not the
reduced rate. For high-port controllers, the PHY rate
is reported correctly.
Это что получается что мне надо принудительно все диски перевести в режим SATA1 150 МБ\С?
Или я что-то не так понимаю?
- GARRY
- Сотрудник Тринити
- Сообщения: 101
- Зарегистрирован: 05 мар 2004, 12:57
- Откуда: Санкт-Петербург
- Контактная информация:
Re: Adaptec 5405 и WD HDD. Только 1.5 Gb/s?
Партномер дисков какой?
Re: Adaptec 5405 и WD HDD. Только 1.5 Gb/s?
а как узнать part номер?
могу написать версию прошивки и серийный номер
модель WD5002ABYS-0
SERIAL WD-WCASYC577812
FIRMWARE 02.03B03
все диски покупались одновременно.
могу написать версию прошивки и серийный номер
модель WD5002ABYS-0
SERIAL WD-WCASYC577812
FIRMWARE 02.03B03
все диски покупались одновременно.
- GARRY
- Сотрудник Тринити
- Сообщения: 101
- Зарегистрирован: 05 мар 2004, 12:57
- Откуда: Санкт-Петербург
- Контактная информация:
Re: Adaptec 5405 и WD HDD. Только 1.5 Gb/s?
WD5002ABYS из листа совместимости, работать должны на 3G
Вам ни чего понижать не надо.
Вам ни чего понижать не надо.
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 24 гостя