Adaptec5805 Raid high cpu i\o wait

Поломалось, посыпалось, не работает...

Модераторы: Trinity admin`s, Free-lance moderator`s

Ответить
stalker2011
Junior member
Сообщения: 7
Зарегистрирован: 28 дек 2010, 01:00
Откуда: Mariupol

Adaptec5805 Raid high cpu i\o wait

Сообщение stalker2011 » 28 дек 2010, 23:19

Доброго времени суток. Имеется сервер с 6 сас 1Тб жесткими упакованными в Raid1+0. При большой дисковой активности в топе ряд ядер висит в состоянии wait иногда достигающего 100%. Соответственно скорость доступа к файлам порядка 15MB/s. Причем иногда даже nginx стоящий на отдаче пишет в логе File not found.. хотя етественно он на месте. На сервере крутится SLES10. Недавно на рйде отказала BBU, но после замены никаких изменений в положительную сторону. Прошивка жестких дисков до версии sn06 и самого адаптера до версии 17911 излечило только ошибки ttlDiskFailures, но видимого эффекта не дало. Как и проверка утилитой arcconf массива на ошибки

Ниже привожу выдержку из статусной таблицы адаптека:
./arcconf getconfig 1
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 5805
Controller Serial Number : 8C4110B06B4
Physical Slot : 53
Temperature : 66 C/ 150 F (Normal)
Installed memory : 512 MB
Copyback : Disabled
Background consistency check : Disabled
Automatic Failover : Enabled
Global task priority : High
Performance Mode : Default/Dynamic
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 2/0/0
Statistics data collection mode : Enabled
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (16343)
Firmware : 5.2-0 (16343)
Driver : 1.1-5 (2449)
Boot Flash : 5.2-0 (16343)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Optimal
Over temperature : No
Capacity remaining : 100 percent
Time remaining (at current draw) : 1 days, 20 hours, 7 minutes

----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name :
RAID level : 10
Status of logical device : Optimal
Size : 689 MB
Stripe-unit size : 256 KB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back) when protected by battery/ZMM
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Group 0, Segment 0 : Present (0,0) 9QJ2L16K
Group 0, Segment 1 : Present (0,1) 9QJ2KWJ3
Group 1, Segment 0 : Present (0,2) 9QJ2BPH8
Group 1, Segment 1 : Present (0,4) 9QJ2C2X0
Group 2, Segment 0 : Present (0,5) 9QJ2KWV8
Group 2, Segment 1 : Present (0,6) 9QJ2KX04

Logical device number 1
Logical device name : data
RAID level : 10
Status of logical device : Optimal
Size : 2859320 MB
Stripe-unit size : 256 KB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back)
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : No
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Group 0, Segment 0 : Present (0,0) 9QJ2L16K
Group 0, Segment 1 : Present (0,1) 9QJ2KWJ3
Group 1, Segment 0 : Present (0,2) 9QJ2BPH8
Group 1, Segment 1 : Present (0,4) 9QJ2C2X0
Group 2, Segment 0 : Present (0,5) 9QJ2KWV8
Group 2, Segment 1 : Present (0,6) 9QJ2KX04


----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,0(0:0)
Reported Location : Enclosure 0, Slot 0
Reported ESD(T:L) : 2,0(0:0)
Vendor :
Model : ST31000340NS
Firmware : AN05
Serial number : 9QJ2L16K
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off
NCQ status : Disabled
Device #1
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,1(1:0)
Reported Location : Enclosure 0, Slot 1
Reported ESD(T:L) : 2,0(0:0)
Vendor :
Model : ST31000340NS
Firmware : AN05
Serial number : 9QJ2KWJ3
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off
NCQ status : Disabled
Вложения
Support1.tar.gz
(516.42 КБ) 576 скачиваний

Аватара пользователя
diz
Advanced member
Сообщения: 1189
Зарегистрирован: 12 янв 2009, 12:09
Откуда: Пермь

Re: Adaptec5805 Raid high cpu i\o wait

Сообщение diz » 03 янв 2011, 16:24

А сколько iops`ов контроллер-то отдает? Может, Вы слишком многого хотите от 6и SATA дисков?

Ответить

Вернуться в «Массивы - Технические вопросы, решение проблем.»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 33 гостя