Диск на Storage показывает "LEFTOVR"

[assm]

Здравствуйте.
Вопрос по Storage HP/MSA2312.
В нем имеется 10 дисков SAS, на которых сделан RAID -массив 10, состоящий из 8-ми дисков, то есть два в резерве.
Два диска на передней панели горят оранжевыми глазками, а в консоли конфигурирования показывают статус "Leftovr". Как можно вернуть их в строй, то есть вернуть им статус "SPARE"не разбивая RAID?
Спасибо.

[exLH]

Чтение документации запретили приказом начальства?

Clearing Metadata From Leftover Disk Drives
If a disk drive’s metadata identifies it as part of a nonexistent virtual disk, the drive is considered a leftover. SMU reports the drive’s virtual disk as Leftover and shows the drive as follows in enclosure view:
The storage system uses metadata to identify virtual disk members after restarting or replacing enclosures. A drive becomes a leftover when it is removed from the enclosure where that drive is part of a virtual disk, and either the virtual disk is deleted and the drive is reinserted, or the drive is inserted in a different system.
Before you can use the drive a different virtual disk or as a spare, you must clear the metadata.
To clear metadata from drives:
1. Select Manage > Utilities > Disk Drive Utilities > Clear Metadata.
An enclosure view is displayed in which only Leftover and Available drives are selectable. Available drives are considered to have had their metadata cleared, but are selectable in case a drive with partial metadata has been inserted into the system.
2. Select the drives whose metadata you want to clear.
3. Click Clear Metadata For Selected Disk Drives.

[assm]

Спасибо. Метаданные очищены, глазки погасли.