Товарищи опишите пожалуйста за что отвечают данные параметры и как их правильно применить для себя.
Не могу понять о чём говорится в мануале.
Вот из описания:
Read#/Write#
The read/write ratio for invalidating data on the SSD. When the ratio is reached, the page is removed from the cache. Values range from 1-10 for each parameter.
dirtyPageThreshold#
Controls the amount cache space allocated to “dirty” data; that is, data that has not been committed to disk. The threshold value ranges from 1-100 (percent). Once the percentage of dirty pages crosses the threshold, the data are flushed to disk.
Спасибо отозвавшимся.
Adaptec MaxCache3.0 flush and fetch & Dirty page treshold
Модераторы: Trinity admin`s, Free-lance moderator`s
-
- Junior member
- Сообщения: 2
- Зарегистрирован: 22 авг 2014, 15:41
-
- Junior member
- Сообщения: 2
- Зарегистрирован: 22 авг 2014, 15:41
Re: Adaptec MaxCache3.0 flush and fetch & Dirty page treshol
Перевести конечно оно переводится, о чём речь примерно понимается, но я не понимаю самих условий, при которых выполняется описуемое действие.
Я не понимаю какой параметр вообще считать счётчиком
Это описание относится к технологии flush and fetch. Получается при 10 считываниях или записях данные обнуляются?
Read#/Write#
The read/write ratio for invalidating data on the SSD. When the ratio is reached, the page is removed from the cache. Values range from 1-10 for each parameter.
А здесь выделяется ёмкость накопителя для работы с кэшированием?
dirtyPageThreshold#
Controls the amount cache space allocated to “dirty” data; that is, data that has not been committed to disk. The threshold value ranges from 1-100 (percent). Once the percentage of dirty pages crosses the threshold, the data are flushed to disk.
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 22 гостя