Как отрезать LUN на Adaptec ASR-5405

Конфигурирование, планирование RAID систем, возможности, технологии, теория. Qlogic, LSI Logic, Adaptec ...

Модераторы: Trinity admin`s, Free-lance moderator`s

Аватара пользователя
gs
Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Re: Как отрезать LUN на Adaptec ASR-5405

Сообщение gs » 27 июл 2009, 15:01

Никто Вам этого не расскажет, это тайна фирмвареписателей. Но вообще-то это было бы очень странно.

Black-Dragon
Advanced member
Сообщения: 507
Зарегистрирован: 17 апр 2009, 00:49
Откуда: Yerevan

Re: Как отрезать LUN на Adaptec ASR-5405

Сообщение Black-Dragon » 27 июл 2009, 16:46

gs писал(а): Но вообще-то это было бы очень странно.
Вот пара выдержек:
DS4000 Best Practices and Performance Tuning Guide
... RAID-1 (refer to Figure 2-11) is also known as disk mirroring. It is most suited to applications that require high data availability, good read response times, and where cost is a secondary issue. The response time for writes can be somewhat slower than for a single disk, depending on the write policy. The writes can either be executed in parallel for speed or serially for safety.
Что значит "или"? Где и кто выбирает режим?


Disk Subsystem Performance Analysis for Windows, документ от MS. Сам по себе довольно интересный, но есть и ляпы, IMHO.

(речь о RAID1 и RAID10)
Mirrored spindles do not help write request performance—they hurt it. It is more than just the fact that every write requests becomes two (or more). It is because, in the safest scenario, individual write completions must wait on all M disks in a mirrored set containing the target data to complete the request. This means the originating write completion is gated on the longer of the two (or more) mirrored writes. This will degrade response times and thereby affect throughput for workloads that have any serialization of disk requests.

...
• Performance:
For write requests, both parts of a mirror must be updated, reducing the available write throughput by >50% for 2-way mirrors, >66% for 3-way mirrors, and so on. On the other hand, read performance improves as the number of mirrors in each set increases.
Выделенное вообще фигня. Такое ощущение, что под n-way mirror автор в данном куске текста понимает не количество пар дисков (зеркал) в страйпе, а количество дисков в одном зеркале (в этом случае, если дисков в одном зеркале n, а запись идёт по очереди на каждый диск, то скорость будет падать именно таким образом). Однако, таких массивов я не видел...

Ответить

Вернуться в «Массивы - RAID технологии.»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 17 гостей