с это момента что в логах? без инфы тяжело понять что происходит
посмотрите есть-ли команда dmesg в консоли, если есть то опубликуйте
dmesg, а так же 'cat /proc/scsi/scsi; fdisk -l /dev/sd*; если нет dmesg to просто инфу из всех консолей
>cat /proc/scsi/scsi
Attached devices: (все, больше ничего)
> fidsk -l /dev/sd*
пусто
А выдрать инфу из консолей возможности нет, кроме как перенабираеть ее всю ?
cat /var/log/dmesg
<4>Linux version 2.6.5-7.97-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Fri Jul 2 14:21:59 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
<4> BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
<4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
<4> BIOS-e820: 000000007ff70000 - 000000007ff78000 (ACPI data)
<4> BIOS-e820: 000000007ff78000 - 000000007ff80000 (ACPI NVS)
<4> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
<4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
<5>128MB vmalloc/ioremap area available.
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<4>On node 0 totalpages: 524144
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 225280 pages, LIFO batch:16
<4> HighMem zone: 294768 pages, LIFO batch:16
<6>DMI present.
<6>ACPI: RSDP (v000 PTLTD ) @ 0x000f5e10
<6>ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7ff730a9
<6>ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x7ff77e38
<6>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7ff77eac
<6>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7ff77f48
<6>ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7ff77f70
<6>ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x7ff77fc0
<6>ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x7ff730e5
<6>ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x1008
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: BOOT_IMAGE=linux SuSE=,,4B1FCFFF.030400, initrd=initrd ramdisk_size=65536 manual=1 vga=0x31a splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order 12: 32768 bytes)
<4>CKRM Initialization
<4>...... Initializing ClassType<taskclass> ........
<4>...... Initializing ClassType<socket_class> ........
<4>CKRM Initialization done
<4>Detected 3001.567 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 2070076k/2096576k available (1963k kernel code, 25328k reserved, 688k data, 216k init, 1179072k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 5931.00 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<6>Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: Trace cache: 12K uops
<7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU#0: Intel P4/Xeon Extended MCE MSRs (24) available
<6>CPU#0: Thermal monitoring enabled
<4>CPU: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 5571k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd860, last bus=6
<6>PCI: Using MMCONFIG
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<4>Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>vesafb: framebuffer at 0xde000000, mapped to 0xf880a000, size 8128k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=2
<6>vesafb: protected mode interface info at c000:4a7e
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>Simple Boot Flag at 0x39 set to 0x1
<6>apm: BIOS not found.
<4>Initial HugeTLB pages allocated: 0
<4>highmem bounce pool size: 64 pages
<5>VFS: Disk quotas dquot_6.5.1
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>bootsplash: scanning last 2MB of initrd for signature
<6> silentjpeg size 49370 bytes,<6>...found (1280x1024, 20535 bytes, v3).
<4>Console: switching to colour frame buffer device 147x55
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH5: IDE controller at PCI slot 0000:00:1f.1
<6>ICH5: chipset revision 2
<6>ICH5: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:pio
<4>hdc: CD-224E, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 16384 buckets, 128Kbytes
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<6>ACPI: (supports S0 S1 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (minix filesystem).
<6>Non-volatile memory driver v1.2
<6>NET: Registered protocol family 17
<5>SCSI subsystem initialized
<4>hdc: ATAPI 24X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.20
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: irq 10, pci mem f9010000
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<4>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.5-7.97-default ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.7
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver hid
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
<3>hub 1-0:1.0: over-current change on port 7
<3>hub 1-0:1.0: over-current change on port 8
<6>USB Universal Host Controller Interface driver v2.2
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: irq 5, io base 00001400
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.5-7.97-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: irq 11, io base 00001420
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.5-7.97-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.1
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: irq 7, io base 00001440
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.5-7.97-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.2
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: irq 5, io base 00001460
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.5-7.97-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.3
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<4>end_request: I/O error, dev fd0, sector 0
<4>end_request: I/O error, dev fd0, sector 0
<4>end_request: I/O error, dev fd0, sector 0
<3>hub 5-0:1.0: over-current change on port 1
<3>hub 5-0:1.0: over-current change on port 2
<4>end_request: I/O error, dev fd0, sector 0
<4>end_request: I/O error, dev fd0, sector 0
<7>libata version 1.02 loaded.
<4>e1000: Ignoring new-style parameters in presence of obsolete ones
<6>Intel(R) PRO/1000 Network Driver - version 5.2.39
<6>Copyright (c) 1999-2004 Intel Corporation.
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
это то что увидел в консоли (см.фото)