Что за ошибка?

[strog2]

Доброго всем времени суток!Имею скромный сервер на мат плате SE7520JR2.При запуске диагностики выскакивает Error (84FF):System event log full, и на панели индикаторов горит красная лампочка критической ошибки.У меня вопрос с чем это может быть связано?И можно ли исправить это самому?Не прибегая к помощи сервисного центра(гарантия была утеряна).Хочу предупредить что ранее мною была обновлена утилита FRUSDR в связи с тем что все 4 вертушки обдуваемые нутро корпуса очень сильно шумели.

[Tert]

strog2
Сообщение "Error (84FF):System event log full" - это стандартная проблема на всех материнских платах Intel с контроллером mBMC. Под лог в этом контроллере отводится всего 92 записи, которые быстро  заполняются (очистить лог можно из BIOS'а платы). С желтой лампочкой на корпусе это сообщение не связано.
Чтобы выяснить в чем проблема, сохраните System Log на дискету и покажите его здесь.

[VendeTTa]

!Внимательнее следите за тем, куда размещаете свой пост..!

ждем Ваш лог..

[strog2]

Здравствуйте ещё раз!Большое спасибо что откликнулись на мою просьбу.Вот лог.Посмотрите пожалуста.Заранее огроменное спасибо.
=============================================================================
Intel(R) Server Platforms SE7520JR2 BMC RELEASE NOTES
=============================================================================
INTEL Enterprise Platform & Services Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA
=============================================================================
DATE: May 11, 2005
TO: Intel(R) server platform SE7520JR2 customers
SUBJECT: BMC(R) 0.47 Release Notes
=============================================================================
                              LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any
patent, copyright or other intellectual property right. Intel Corporation may
have patents or pending patent applications, trademarks, copyrights, or other
intellectual property rights that relate to the presented subject matter.  
The furnishing of documents and other materials and information does not
provide any license, express or implied, by estoppel or otherwise, to any
such patents, trademarks, copyrights, or other intellectual property rights.  
Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation.

*Other names and brands are the property of their respective owners.

Copyright (c) 2005 Intel Corporation.

=============================================================================
                             ABOUT THIS RELEASE
=============================================================================
REVISION INFORMATION RETURNED BY GET DEVICE ID COMMAND:

Operational mode: v00.47
Flash update mode: v00.11
PIA data: v01.57
Manufacturer ID: 0x000157 (Intel)
Product ID: 0x0022 (SE7520JR2)

Checksum Information:
Operational Code
 Region: 0x00030000 -> 0x000da7da
 Checksum: 0xff11
Boot Block
 Region: 0x00000000 -> 0x00003052
 Checksum: 0x543a

=============================================================================
SYSTEM HARDWARE REQUIREMENTS/REVISIONS
=============================================================================
Intel(R) Management Module(IMM):
 - Advanced Edition PBA C44973-405 or higher with BMC 0.23 or higher
   installed.

 - Professional Edition PBA C46194-301 or higher with BMC 0.23 or higher
   installed.

Advanced Edition NIC board (GCM):
 PBA C44941-201 (or later)

Server Board SE7520JR2 with the following PBA revisions (or higher):
 C53659-301
 C53660-404
 C53661-601
 C53662-503

=============================================================================
      SYSTEM SOFTWARE REQUIREMENTS/REVISIONS
=============================================================================
- SE7520JR BIOS revision:
 SE7520JR22.86B.P.05.00.0067.111820041003 (or later)
 Any BIOS version prior to these will cause the BMC serial channel to not
 function properly.

- SE7520JR2 FRU/SDR package:
 JR-6.6.3 or later

- PC87431M mini-Baseboard Managment Controler (mBMC) from National Semiconductor:
 Revision 2.40

- Firmware revisions on the Advanced Edition IMM card:
 FPGA : rev 47 (or later)
 EDID: rev 04
 Any version prior to these will cause the Keyboard and mouse to become
 non-functional.
 The KVM viewer application will also not function properly with earlier
 FPGA versions.

=============================================================================
                        IMPORTANT INSTALLATION NOTES
=============================================================================
- The following files are necessary to update the firmware:
 Run.bat - Batch file used to update the firmware
 7520JR47.hex - BMC 0.47 firmware hex file for the SE7520JR2 platform
 FWPIAUpd.exe - DOS utility to program firmware hex file into the flash device
 Prior versions of this utility will not work with this FW

Executing the fwpiaupd utility with your own command switches is unsupported
and may leave your baseboard in a non-operational state! Please use the
provided batch file to update the firmware.

Executing the batch file can be done from any media (Hard disk, USB disk-on-key,
shared network drive or floppy).

BMC 0.23 or later must be preinstalled.
If this is not the case, please update the IMM firmware to BMC 0.23 before
updating to this release.

The boot block has been changed with the BMC 0.31 release but it is not
required for this release. The batch file provided with this BMC package
does not update the boot block.

=============================================================================
                        INSTALLATION PROCEDURE
=============================================================================
- If this update is not being applied to BMC 0.23 or later, please first
 update to 0.23.
- Copy the update files from this release package to the
 media(Hard Drive, USB Disk-on-Key, Floppy...) that you wish to perform
 the update from. Files include:  run.bat, 7520JRxx.Hex, FWPIAUpd.exe,
- Execute the run.bat file to begin the firmware update process (if running
 from the Software Update package, select update IMM Firmware option)
- Install the webserver EFS image revision 1.20 by either running upd_efs.bat
 (if running from the Software Update package, select update EFS
 Webserver option) or by uploading the efs_120.efs file using the web server
 at URL http://xxx.xxx.xxx.xxx/!@efsUpdate. Replace the xxx.xxx.xxx.xxx
 with the IP address used to configure the HTTP web server feature.
 Please use the provided batch file as it contains the necessary -nopc
 command line switch to FWPIAUPD.exe to successfully update the EFS area.
- Proceed to install the latest FRU/SDR package.

=============================================================================
                          KNOWN ISSUES/WORKAROUNDS
=============================================================================
- This and all future firmware releases will only support the fab -3xx
 and later Professional and Advanced IMM.
 Fab -2xx and prior modules are no longer supported!

 See the SYSTEM HARDWARE REQUIREMENTS section above for details.

- Please clear the web browser cache if the web server feature was used prior
 to BMC 0.37 as these cached pages will conflict with the pages generated
 with versions after BMC 38 and EFS content rev 1.12.
 The clearing of the web browser cache need only be done once.

=============================================================================
                     FEATURES ADDED With This Release
=============================================================================

BMC 0.47:
- None


=============================================================================
                      ISSUES FIXED With This Release
=============================================================================

BMC 0.47:
- DCS: 42200
 Fix for #20373 created another issue (DR#42200) which has been resolved
- DCS: 42362
 A memory leak in the web server has been resolved
- DCS: 19930
 Self test errors with IMM Pro; changes that are made for the NCR SOL issue



*******************************
End of Current Release Notes
*******************************



===============================================================================
Pedigree of Changes
===============================================================================


BMC 0.46:
- DCS: 19438
 Invalid Chassis information and Asset tag  in the 'System Summary' page.
- DCS: 19850
 Host and domain name updates not successful.
- DCS: 19878
 Gateway IP not getting reflected on the Summary page.
- DCS: 20076
 False front panel temp lower critical events generated
- DCS: 20194
 BMC TAM WDT alarms being cleared on power off
- DCS: 20373
 When user creates a session with USER access, they can run any admin command
- DCS: 41879
 Telnet/CLI: entering character after valid password "IPMI Session Error"
- DCS: 41920
 No LAN functionality
- DCS: 42158
 Watchdog timer test causes FRB timeout failure
- DCS: 76110
 SE7520JR2 FRUSDR 6.6.1-Unexpected sel events for Temp Sensors,
 Power Unit and Terminator
- DCS: 76154
 POST Codes Not Driven by SIO on UUT3

BMC 0.45:
- DCS: 41857
 (X) Power On/Off (warm reset) test hangs at Post C ode 13 or F8  
- DCS: 42201
 SR4850HWx CLI and SOL redirection loses connection frequently  

BMC 0.44:
- DCS: 20125
 KVM : Not able to see video redirection on SE7520JR2 Fab 503 board.

BMC 0.43:
- DCS: 20229
 HTTP: 'Configuration' page fields could be set with 'User' privilege level.  

BMC 0.42:
- DCS: 16837
 FW: User Feature cmd for HTTP/S enables returns incorrect # of data bytes
- DCS: 20132
 BMC fails self test err #8300
- DCS: 20140
 Multiple email alerts are observed for single SEL entry
- DCS: 20194
 BMC TAM WDT alarms being cleared on power off
- DCS: 20213
 SCW: There are some errors observed at the end of SCW configuration.
- DCS: 20268
 BMC stops responding very often - SE7520JR2
- DCS: 20307
 Telnet: Invalid Password leads to BMC reset

BMC 0.41:
- DCS: 20132
 BMC fails self test err #8300
- DCS: 20140
 Multiple email alerts are observed for single SEL entry
- DCS: 20173
 HTTP: Changing UsrUrl2 adds special characters
- DCS: 41534
 SNMP: SNMPGet of SDR returns wrong values
- DCS: 41678
 SMTP: Two emails received for the same event

BMC 0.40:
- DCS: 20078
 BMC loses connectivity with KVM Viewer and launching ISM  
- DCS: 20115
 Updating or reading GCM FRU data fails nearly 30% of attempts

BMC 0.39:
- DCS: 19073
 BMC not responding going across sub-nets for Adv IMM card
- DCS: 19881
 BMC38/Telnet: BMC has become busy(CC is 0xC0), not coming out of this state
- DCS: 19376
 KVM -Rebooting  the system with KVM session active will lock the local  Mouse
- DCS: 19844
 CGI config byte reset to 00
- DCS: 19846
  Web server hangs on clicking ""Clear SEL"" on the page.
- DCS: 19402
 SEL page in EFS content rev 1.6 has errors
- DCS: 19827
 Embedded CLI/SOL functionality is inconsistent and does not display correctly
- DCS: 19690
 Web Server SEL View erratic
- DCS: 19377
 KVM - Mouse control not returned back to Local server.
- DCS: 19891
 SNMP Enable bit resets with power cycle
- DCS: 19454
 SEL page does not display the entries.
- DCS: 19860
 BMC38/Telnet: telnet and HTTP are not working when telnet port is changed
- DCS: 19861
 PS1 Status on the Summary page shows ""Inst"" for ""Installed"".
- DCS: 19880
 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active
- DCS: 19850
 Host and domain name updates not successful.  
- DCS: 19878
 Network gateway IP not getting reflected on the Summary page
- DCS: 19879
 Host name and Domain name should be clear on the Summary page.  
- DCS: 19438
 Invalid Chassis information and Asset tag  in the "System Summary" page.
- DCS: 19880
 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active
- DCS: 19881
 BMC38/Telnet: BMC has become busy(CC is 0xC0), not coming out of this state  
- DCS: 74756
 FAN 5 and FAN 6 sensor numbers get swapped when IMM installed
- DCS: 19073
 BMC not responding going across sub-nets for Adv IMM card
- DCS: 19881
 BMC38/Telnet: BMC has become busy(CC is 0xC0), not coming out of this state
- DCS: 19846
 Web server hangs on clicking ""Clear SEL"" on the page.
- DCS: 19376
 KVM -Rebooting  the system with KVM session active will lock the local  Mouse
- DCS: 19891
 SNMP Enable bit resets with power cycle
- DCS: 19844
 CGI config byte reset to 00
- DCS: 19850
 Host and domain name updates not successful.
- DCS: 19438
 Invalid Chassis information and Asset tag  in the ""System Summary"" page.
- DCS: 19402
 SEL page in EFS content rev 1.6 has errors
- DCS: 19377
 KVM - Mouse control not returned back to Local server.
- DCS: 19454
 SEL page does not display the entries.
- DCS: 19690
 Web Server SEL View erratic
- DCS: 19723
 [x] Chassis intrussion not being logged in the SEL when opening the side cover
- DCS: 19878
 Gateway IP not getting reflected on the Summary page.
- DCS: 19879
 Host name and Domain name should be clear on the Summary page.
- DCS: 19860
 BMC38/Telnet: telnet and HTTP are not working when telnet port is changed"
- DCS: 19861
 PS1 Status on the Summary page shows ""Inst"" for ""Installed"".
- DCS: 19880
 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active
- DCS: 19492
 Email Alert is not working for 4 configurations
- DCS: 19585
 LANDesk reports that mux is getting stuck in SYSTEM mode at BIOS POST end
- DCS: 19862
 Alerts not generated for configured filters
- DCS: 19882
 Error while accessing power control and SEL details in EFS web page
- DCS: 19937
 SEL pages not working after few hours of loading BMC 1.39, EFS 1.13
- DCS: 39766
 SDR Clear does not cancel reservation
- DCS: 38098
 SDR EraseTime timestamp Is Not Expected Time Value
- DCS: 74762
 Sometimes BMC will disable event messages from threshold type sensors after A/C off then on
- DCS: 76109
 Sometimes BMC will disable event messages from threshold type sensors after A/C off then on
- DCS: 19654
 Issues with SEL view range in the web server
- DCS: 19840
 Unnecessary characters appear on the left panel in Mozilla.
- DCS: 19882
 Error while accessing power control and SEL details in EFS web page
- DCS: 19907
 SOL: Accepted Character Count field is wrong.
- DCS: 19933
 Issues with automatic refresh of SEL pages and default no. of entries.
- DCS: 19937
 SEL pages not working after few hours of loading BMC 1.39, EFS 1.13
- DCS: 19956
 Issues with ""Next"" button on the ""System Event log/SEL details""  page.
- DCS: 19958
 Issues with ""Previous"" button on the ""System Event log"" page.
- DCS: 19959
 Issues with ""Previous"" button on the ""SEL details"" page.
- DCS: 19969
 embedded web server gives error if cli accessing BMC
- DCS: 19880
 BMC38/Telnet: login propmt should not come when all 4 telnet sessions are active
- DCS: 19881
 BMC38/Telnet: BMC has become busy(CC is 0xC0), not coming out of this state
- DCS: 19937
 SEL pages not working after few hours of loading BMC 1.39, EFS 1.13
- DCS: 19943
 SOL: SOL payloads jam indefinitely. Operation Status = 0x40
- DCS: 20013
 HTTP : After working for around 2 - 2.5 hrs, Found issues with  SEL details page
- DCS: 20038
 DC power cycling is causing network stack to become unavailable.
- DCS: 40062
 Cipher Suite Id 7 & 8 failed to establish a session
- DCS: 40063
 Cipher Suite Id 7 & 8 failed to establish a session
- DCS: 40139
 FSC system booting with 19+ SEL entries
- DCS: 41353
 Telnet 'power -console' fails to show server screen
- DCS: 41588
 SNMP fails to change ports
- DCS: 76000
 FRB2 was not disabling the BSP when the SEL log was full
- DCS: 19912
 System fails to boot with Riggins Base, P06 BIOS & IMM
- DCS: 74773
 SE7520BD2 Fab7 board+ SC5300 base chassis+ IMM (professional version module),
 server system can not power up and have 1-5-4-4 beep warning.
- DCS: 19888
 Fix for data entry format in the IPMI command window.
 It now accepts things like "20 18 1" as well as "20 18 01".
- DCS: 20041
 Enabled the ability to write to the power unit and power supply FRU devices

BMC 0.38:
- DCS: 17571  
 HTTP web server about link causes error
- DCS: 19402  
 SEL page in EFS content rev 1.6 has errors
- DCS: 19454
 SEL page does not display the entries
- DCS: 19475
 ctWrong completion code returned for invalid commands in the web page
- DCS: 19558  
 [IMM] Status LED does not return to green from amber
- DCS: 19616
 Fan status LED does not go out after hot swap fan is repaired
- DCS: 19628
 BMC35/Telnet: Telnet is not working for any other port  
- DCS: 19647
 Incorrect data in the SEL record displayed in the SEL page
- DCS: 19654  
 Issues with SEL view range in the web server
- DCS: 19659
 Wrong "Current power state" shown on the "Power Control" page
- DCS: 19678  
 Embedded web server "Help" link is broken
- DCS: 19679
 Unexpected character on web server summary page
- DCS: 19682  
 Dislplay IMM GCM NIC gateway and subnet mask on summary page
- DCS: 19690
 Web Server SEL View erratic
- DCS: 19737  
 Unable to telnet for user1 when password is reset
- DCS: 19801
 Event receiver not set correctly in SATA HSBP after AC cycle
- DCS: 19824
 Inconsistent mouse and keyboard control on KVM
- DCS: 19825  
 Power cycling on can cause the BMC to not allow further connections
- DCS: 19826
 Logging into embedded CLI while KVM ena bled causes BMC reset
- DCS: 19828  
 Embedded CLI Banner still reads Sahalee BMC Embedded Telnet
- DCS: 19833  
 Updating NIC configuration during Telnet Session stops LAN interface
- DCS: 19836  
 Sessions and stress test issues with the web server

BMC 0.37:
- DCS: 19402
 SEL page in EFS content rev 1.6 has errors  
- DCS: 19439
 No data available in the product area of the web page.
- DCS: 19452
 SEL page does not display the entries.  
- DCS: 19497
 Help pages missing in the Embedded web server.  
- DCS: 19534
 EFS Updates failing
- DCS: 19628
 BMC35/Telnet: Telnet is not working for any other port  
- DCS: 19647
 Incorrect data in the SEL record displayed in the SEL page.  
- DCS: 19654
 Issues with SEL view range in the web server.  
- DCS: 19670
 /!@efsUpdate page can be accessed/executed by any privilege level.  
- DCS: 19677
 "About" box for embedded Web Server copyright date  
- DCS: 19678
 Embedded web server "Help" link is broken  
- DCS: 19679
 Unexpected character on web server summary page  
- DCS: 19680
 Embedded Web Server has ( ) behind DIMMS, etc
- DCS: 19681
 Remove "product" from web server summary page
- DCS: 19683
 Web Server failure needs to be in Red  
- DCS: 19684
 Web Server summary page needs to show "RPM"  
- DCS: 19690
 Web Server SEL View erratic
- DCS: 19732
 HTTP does not work for any port other than 80  
- DCS: None
 Sensors that are valid only while DC is on were being scanned
 while DC was off.
- DCS: None
 Separated the PCI HP module set for SR4850HWx as these were conflicting with
 the SE7520AF2 PCI hot plug sensor enumerations.
- DCS: 40239
 Added support for SR4850HWx in the platform mismatch command.

BMC 0.36
- DCS: 39809
 Added new signals in MCH driver
- DCS: None
 Web server enhancements from TME/PME review feedback
- DCS: None
 Moved creation of new command tables to external RAM due to running out
 of internal RAM.

BMC 0.35
- DCS: 19444
 BMC32 Clearlog -state command in Telnet is not behaving as expected  
- DCS: 19468
 BMC32/Telnet: displaylog is not working with "-s" option  
- DCS: 19488
 BMC Prochot monitoring by BMC not reliable
- DCS: 19482
 Could not connect to the web server in SE7520JR2 BMC 33..
- DCS: None
 Fix for mouse and keyboard getting disabled during system reboot or reset.
- DCS: 19535
 Front Panel reset button not getting locked in Sleep S1state
- DCS: 19493
 BMC33/Telnet: telnet is not working with BMC33

BMC 0.34
- DCS: None
 All advanced IMM features to not work with BMC 0.33
- DCS: 19530
 Get HTTP Configuration Parameters-- Parameter Revision is not 0x11  
- DCS: 19485
 BMC to emulate keyboard / mouse correctly on Win2003
- DCS: 19494
 Key Board Gets Disabled on Win2000
- DCS: 39476
 Serial over LAN recieved unexpected successful response

BMC 0.33
- DCS: None
 HTTP web server fixes
- DCS: 17503
 Get SNMP Config Params command returns bad completion code
- DCS: 39454
 SMI timeout does not work
- DCS: 39489
 OEM1 bit is un-settable
- DCS: None
 KVM fixes
- DCS: 18215
 Init Agent fails to initialize the sensor thresholds
- DCS: 16670
 HTTP Power Webpage, timestamp needs to be updated
- DCS: 19402
 SEL page in EFS content rev 1.6 has errors

BMC 0.32
- DCS: 17950
 [IMM] Boot Initator info Block seemingly not validated
- DCS: 19398
 PDB failure status not logged by BMC
- DCS: 15895, 16213, 16597, 16840, 17179, 18805, 19246, and 19321
 Miscellaneous HTTP web server fixes

BMC 0.31
- DCS: 16325
 EMP is not available for 10 seconds after DC ON  
- DCS: 18410
 Communication failure in Terminal mode
- DCS: 19027
 Failed to make direct serial connection (LSM)  
- DCS: 19028
 Failed to establish Serial Modem Connection (LSM)  
- DCS: 19031
 [IMM] SecureModeActive bit is not set by the Secure Mode KB signal.  
- DCS: 19306
 CRERR04 - during console redirection and EMP is enabled
- DCS: 19354
 Enable Telco Alarm Manager feature in SE7520JR2 BMC (IMM)
- DCS: 19363
 BMC 30:SMTP -Parameter Revision is not 0x11
- DCS: 19369
 SMTP config parm#6, DNS override, inverted
- DCS: 75975
 [J1-IMM] BMC did not lock the Power and Reset push-buttons when Secure Mode
 signal is asserted.
- DCS: None
 Add support to allow the SE7520JR2 BMC firmware to execute on a SHW4 server

BMC 0.30
- DCS: 15819
 IPMI2.0 commands not implemented correctly.
- DCS: 16415
 KVM - Get Video Status requires video data structure
- DCS: 16634
 FW: Setting an SMTP configuration appears to set multiple configurations
- DCS: 16837
 FW: User Feature cmd for HTTP/S enables returns incorrect # of data bytes
- DCS: 17186
 Get Channel Payload Support responses the same output
- DCS: 17459
 KVM - Set KVM Config. to set in progress results in invalid completion code
- DCS: 17460
 KVM - issuing Set KVM Configuration to disable KVM does not work.
- DCS: 17501
 KVM - Activate Payload not returning all required bytes
- DCS: 17502
 KVM - Video Status incorrectly reported when powered off
- DCS: 17503
 Get SNMP Config Params command returns bad completion code
- DCS: 17538
 FW:  Issues with Set SMTP Config Params command
- DCS: 17540
 FW:  Issues with Set/Get LAN Config Params cmd w/ parameter 0xc4
- DCS: 17773
 KVM - No Video Data Received
- DCS: 17779
 KVM - Video packets still sent after Payload Deactivated
- DCS: 17815
 KVM - Invalid Mouse Type reported
- DCS: 17860
 KVM - BMC Becomes unresponsive to LAN connection
- DCS: 17863
 KVM - Capture Reference Frame has too much data in it
- DCS: 17865
 KVM - System will not boot w/KVM session Active
- DCS: 17949
 LAN: chan 3 MAC Addr not auto-populated
- DCS: 18387
 [IMM] Front Panel LCP is not discovered.
- DCS: 18698
 Status LED does not turn amber when there is a fault on the system
- DCS: 19169
 Restart Cause command is not working as expected
- DCS: 19237
 PCI Hot Plug sensors stuck in init update mode after exit FW-Xfer mode
- DCS: 19239
 [IMM] IERR occured at  AC power cycle test.
- DCS: 19267
 BMC29:Power control fault beep codes are emitted when repeated power cycles are
- DCS: 19299
 LAN Alerts with Alert strings are reported as malformed packets
- DCS: 19321
 EFS format/content not finalized yet
- DCS: 19324
 Mouse / Keyboard Not Initialized when OS booted during  a KVM session
- DCS: 19326
 FPGA Encryption Problematic - After 100 + packets video data length is invalid

BMC 0.29:
- DCS: 19155
 BMC doesn't correctly transition to S1 sleep state
- DCS: 34955
 To implement Memory board Front and rear temperature sensors
- DCS: None
 Better handling of power loss & DC off events.
- DCS: 19139
 Console Redirection Causes Firmware Progress Errors in LD  
- DCS: 38307
 System failed to log AC power failure during boot
- DCS: 19107
 BMC 0.28 Encountered failure while verifying sensor initialization value.  
- DCS: 18875
 Online Firmware Update causes BMC to hang
- DCS: 19156
 RQ_SyncSMBus command locking wrong bus  
- DCS: 18963
 PS_PWR_GD ISR is not being enabled occasionally
- DCS: 18215
 Removed init agent changes that were causing other problems.
- DCS: 18936
 [IMM] IERR event is always occur right after AC on
- DCS: 19135
 mBMC update with IMM installed fails on SE7520AL2 and SE7520BD2
- DCS: 16483
 BMC and SDR updates fail
- DCS: 75901
 DC cycling failed with IMM cards installed (Procs go offline)
- DCS: 75907
 Processors being Disabled after an OS Restart
- DCS: 75908
 Problems Powering On after an OS Shutdown
- DCS: 75915
 BMC25 is shutting down immediately after loading and disabling the processors
- DCS: 74593
 BIOS B19~P03 versions cause UUT boot failed after several front panel power
 cycling while IMM card installed.
- DCS: 74618
 IMM fails in SE7520BD2 -601A SCSI

BMC 0.28:
- DCS: 18866 & 18867
 Thermal Trips were calling power control code to power down system. This
 functionality is handled directly by the hardware.
- DCS: None
 Added new module selection for Memory Board
- DCS: None
 Fans would sometimes indicate failure at DC on.
- DCS: 19066
 PCI Hot Plug Sensors do not show up
- DCS: None
 Power supplies from shutting down due to current spikes caused by fan speed
 changing to quickly.
- DCS: None
 Processors are getting enabled and disabled twice during FRB3 failures.
- DCS: None
 ID LED on would get locked on when button is pushed during power state
 transitions.
- DCS: 18883
 OOB connection not working out of subnet
- DCS: 19054
 Repeat issuance of CLI power actions causes IMM to stop responding
- DCS: 19056
 Thermal Trips being seen during DC power cycle testing
- DCS: 19072
 1-5-4-4- beep code
- DCS: 19083
 CLI lockup on power commands with BMC A.27 engineering release  
- DCS: 19084
 BMC a.27 causing therm trip and IERR errors on SE7520BD2 and SE7520JR2

BMC 0.27:
- Only released as incremental developer drops to verify resolutions that are
 in place with the BMC 0.28 release.

BMC 0.26:
- DCS: 19010
 Self test error with LSM Linux Console
- DCS: 18875
 Online Firmware Update causes BMC to hang
- DCS: 19056
 Thermal Trips being seen during DC power cycle testing
- DCS: 19016
 Temporary failure of boot
- DCS: 18215
 Init Agent fails to initialize the sensor thresholds
- DCS: None
 Added some kick start ramping, but then went to a fixed 50% kick start.
- DCS: 19066
 PCI Hot Plug Sensors do not show up  
- DCS: 38317
 BMC release process not producing repeatable checksums
- DCS: None
 Changed to notify waiting task if multiple loss of arbitration detected,
 regardless of task state.
- DCS: 18963
 PS_PWR_GD ISR is not being enabled occasionally
- DCS: 19019
 Rapid, succesive activation of the Power button, hangs BMC  
- DCS: 19054
 Repeat  issuance of CLI power actions causes IMM to stop responding


BMC 0.25:
- DCS: 18963
 PS_PWR_GD ISR is not being enabled occasionally
- DCS: 18638
 BMC22: OnlineUpdateOpenArea is returning 0x00 as CC when it should not return so
- DCS: None
 Fix for LAN channels not working after an exit firmware transfer mode
- DCS: 18875
 Online Firmware Update causes BMC to hang

BMC 0.24:
- DCS: None
 Fixed a defect in the VERIFY macro
- DCS: None
 Added support for using a manufacturing test SDR
- DCS: None
 HW team reporting fan circuit FETs being blown due to LM93 PWM outputs being
 driven while DC is off
- DCS: None
 If the private store gets cleared both processors will come up as disabled
 by FRB3 on the next boot
- DCS: 18208
 [IMM] CF9 hard reset does not work
- DCS: None
 mBMC Driver potential error fix
- DCS: None
 HW folks have the nominal, boost & sleep values set to FCh in the SDRs
 which is wrong.
- DCS: 18217 & 18551
 Implement a bi-color system fault indicator
 (follow-up: counter-act the mBMC’s clearing of the LEDs on DC power on)
- DCS: None
 Added defines to nullify printf in release mode
- DCS: 18806
 BMC generates Self Test Error/ Parity Error with LanDesk SOL console
- DCS: None
 Added support for using a shipping, TDE Adv IMM and TDE Pro IMM SDR.
- DCS: 18217
 The comment describing the mBMC color conversion value assumptions was incorrect
- DCS: None
 Found a memory leak in mactconet.c
- DCS: None
 mBMC Driver reduce number of retries
- DCS: 18461
 HDD LED on front panel is red when IMM is installed
- DCS: None
 Incorporate the latest FSC spreadsheet data into the LM93 register defaults
- DCS: None
 Added support for handling the IPMI requests “Set ACPI Power State?
 and “Get ACPI Power State?through the SMM channel.
- DCS: None
 mBMC Driver parameter tweaking to increase performance
- DCS: 18866
 [IMM] Thermal trip event is not logged in SEL
- DCS: 18867
 [IMM] IERR event is not logged in SEL
- DCS: 18745
 Fans do not contribute to the overall health of the system
- DCS: 18883
 OOB connection not working out of subnet
- DCS: 18243
 2nd CPU fails with frb3 during post
- DCS: 18802
 BMC failing self test corrupts BIOS information
- DCS: 18854
 SE7520AL2 BMC 23 - Resolve MAC hangs BMC
 
BMC 0.23:
- DCS: 16967
 PET Traps were not getting detected
- DCS: 18548
 [IMM] BMC failed BIOS self test after update to  BMC version 21
- DCS: 18612
 BMC does not retain OOB connectivity after installation of ISM on server  
- DCS: 18217
 Front Panel Bi-Color LED behaviour
- DCS: 18551
 [IMM] Status LED is not changed at  the critical event.  
- DCS: 75827
 [J1] Baseboard Management Controller Failed by Self Test command during POST
 with Sahalee FW 0.21.
- DCS: 18549
 LM93 OEM SDR would cause the BMC to hang
- DCS: 18595
 FRUSDR version 6.2.1 Update failling with BIOS P01 and BMC 21
- DCS: None
 Added encapsulating PACKED_xxx definitions around some packed structures.
- DCS: None
 Refined the fan control for power ON and Hot swap kick Start;
 Added checks to avoid C, NC Assertions during power ON&Reset;
 Added the de-assertion Actions in the PIA for hot swap fans; Fans boost
 in the particular domain on HS fan removal
 Restored the default Nominal to half by handling the power on and HS kick
 start in the fanctrl.c code
- DCS: None
 New OEM command to restore the non-volatile configuration.
 This command needs to be called by the utility when the platform mismatch
 found during the FW update.
- DCS: None
 SensAvgCreate() would allow illegal input data
- DCS: None
 Baseboards with maximum DIMM capacity were causing systems to reset
 during POST due to the FRB3 timer expiring.
- DCS: None
 mBMC Driver message potential error fix
- DCS: None
 Multiple stack overflow issues
- DCS: None
 This check-in partially addresses clearing out bogus fan failures that are
 persistently stored.
 I have seen issues with moving my IMM between different platform types,
 where ATTNID_OK has a different value.

[strog2]

Извиняюсь что такой большой....надо было на имэйл кидать.....

[Kirill Tkachev]

Это немного не тот лог.
Скачайте утилиту SEL Viewer
http://downloadcenter.intel.com/scripts ... nldID=7470
И сохраните SEL в файл.

[strog2]

сохранил в файл тока куда кинуть?

[VendeTTa]

сюда, на форум...

[strog2]

Кинул на  at@trinity.su.Посмотрите.

[VendeTTa]

Получил, сейчас подумаем над Вашим вопросом  :roll: