Supermicro X6DVA-EG2 - не понял...
Модераторы: Trinity admin`s, Free-lance moderator`s
-
- Junior member
- Сообщения: 4
- Зарегистрирован: 19 янв 2007, 09:42
- Откуда: Москва
- Контактная информация:
Supermicro X6DVA-EG2 - не понял...
Привет! проблема такая - в описании мамы на сайте производителя указан интегрированный sata raid. начал ковырять - не нашел!? bios последний. И при установке ОС (винды пробовали разные) уходит в перезагрузку за 10 мин. до окончания установки (после установки устройств) а потом restart setup...
Идеи есть?
Идеи есть?
- exLH
- Сотрудник Тринити
- Сообщения: 5061
- Зарегистрирован: 11 фев 2004, 15:49
- Откуда: Москва
- Контактная информация:
Документацию читали?
И страницу С-2 документации?
=========================
To configure SATA RAID for Operating Systems that support RAID
functions(--Windows, Red Hat & SuSe, Linux)
1. Select "Advanced Setting" from the AMI BIOS menu.
2. Select the IDE Configuration menu.
3. Change the IDE Configuration to "P-ATA Only."
4. Under the item-"Configure S-ATA as RAID", select "Yes".
5. Tap the <Esc> key and scroll down to "Exit". Select "Save and Exit"
from the "Exit" menu. Press the <Enter> key to save the changes and exit
the BIOS.
6. Once you've exited the BIOS Utility, the system will re-boot.
7. During the system startup, press the <Ctrl> and the <A> keys simultaneously
to run the Adaptec RAID Configuration Utility when prompted by
the following message:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
=========================
И страницу С-2 документации?
=========================
To configure SATA RAID for Operating Systems that support RAID
functions(--Windows, Red Hat & SuSe, Linux)
1. Select "Advanced Setting" from the AMI BIOS menu.
2. Select the IDE Configuration menu.
3. Change the IDE Configuration to "P-ATA Only."
4. Under the item-"Configure S-ATA as RAID", select "Yes".
5. Tap the <Esc> key and scroll down to "Exit". Select "Save and Exit"
from the "Exit" menu. Press the <Enter> key to save the changes and exit
the BIOS.
6. Once you've exited the BIOS Utility, the system will re-boot.
7. During the system startup, press the <Ctrl> and the <A> keys simultaneously
to run the Adaptec RAID Configuration Utility when prompted by
the following message:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
=========================
Кто сейчас на конференции
Сейчас этот форум просматривают: Google [Bot] и 4 гостя