Используется она не по прямому назначению - под задачи git и team сервера. В попытке сделать его тише понизил обороты вентиляторов в BIOS до минимума - 5000 rpm, и вроде как стало тише, но вот обороты на вентиляторах блоков питания PWS-451-1R не получается снизить, может кто знает, можно-ли это сделать вообще или это бесполезная затея (поковырялся на форумах netgear...)?
dmidecode:
Код: Выделить всё
System Information
Manufacturer: Supermicro
Product Name: X7SBL
Version: 04/07/2010 ReadyNAS-3100 V1.3
Serial Number: ----------
UUID: ----------
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: X7SBL
Version: PCB Version
Serial Number: ----------
Код: Выделить всё
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +34.0°C (high = +76.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +76.0°C, crit = +100.0°C)
w83627hf-isa-0290
Adapter: ISA adapter
in0: +0.13 V (min = +1.09 V, max = +1.50 V) ALARM
in1: +0.13 V (min = +1.09 V, max = +1.50 V) ALARM
in2: +0.13 V (min = +2.82 V, max = +3.79 V) ALARM
in3: +3.07 V (min = +4.08 V, max = +4.08 V) ALARM
in4: +0.13 V (min = +3.42 V, max = +3.98 V) ALARM
in5: +0.13 V (min = +2.03 V, max = +3.57 V) ALARM
in6: +0.13 V (min = +4.08 V, max = +2.78 V) ALARM
in7: +3.36 V (min = +3.95 V, max = +3.31 V) ALARM
in8: +3.31 V (min = +2.06 V, max = +3.06 V) ALARM
fan1: 0 RPM (min = 2824 RPM, div = 2) ALARM
fan2: 0 RPM (min = 2657 RPM, div = 2) ALARM
fan3: 0 RPM (min = 3082 RPM, div = 2) ALARM
temp1: +124.0°C (high = -41.0°C, hyst = -3.0°C) ALARM sensor = thermistor
temp2: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
temp3: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +1.300 V
beep_enable: enabled
w83793-i2c-0-2f
Adapter: SMBus I801 adapter at 1100
VcoreA: +1.07 V (min = +0.92 V, max = +1.38 V)
VcoreB: +1.24 V (min = +0.00 V, max = +2.05 V)
in2: +1.11 V (min = +0.99 V, max = +1.33 V)
in3: +0.51 V (min = +0.40 V, max = +0.67 V)
in4: +1.81 V (min = +1.62 V, max = +1.98 V)
in5: +3.30 V (min = +2.96 V, max = +3.63 V)
in6: +0.97 V (min = +0.90 V, max = +1.10 V)
+5V: +5.09 V (min = +4.52 V, max = +5.50 V)
5VSB: +5.05 V (min = +4.52 V, max = +5.50 V)
Vbat: +3.25 V (min = +2.70 V, max = +3.30 V)
fan1: 5314 RPM (min = 712 RPM)
fan2: 5895 RPM (min = 712 RPM)
fan3: 5720 RPM (min = 712 RPM)
fan4: 0 RPM (min = 712 RPM) ALARM
fan5: 0 RPM (min = 712 RPM) ALARM
fan6: 0 RPM (min = 712 RPM) ALARM
fan7: 0 RPM (min = 712 RPM) ALARM
fan8: 0 RPM (min = 712 RPM) ALARM
fan9: 0 RPM (min = 712 RPM) ALARM
fan10: 0 RPM (min = 712 RPM) ALARM
temp1: +34.0°C (high = +81.0°C, hyst = +76.0°C) sensor = Intel PECI
temp2: -100.0°C (high = +81.0°C, hyst = +76.0°C) sensor = Intel PECI
temp3: -128.0°C (high = +81.0°C, hyst = +76.0°C) sensor = Intel PECI
temp4: -128.0°C (high = +81.0°C, hyst = +76.0°C) sensor = Intel PECI
temp5: +27.0°C (high = +50.0°C, hyst = +45.0°C) sensor = thermistor
temp6: +26.0°C (high = +50.0°C, hyst = +45.0°C) sensor = thermistor
intrusion0: OK
beep_enable: disabled
