Не видит RAID при установке Linux
Модераторы: Trinity admin`s, Free-lance moderator`s
Не видит RAID при установке Linux
Добрый день. Купили сервер iRU Rock 1104R c контроллером RAID Intel Original SASMF8I на борту. Создал массив в raid 10 из 4х SATA, при загрузке сервера raid определяется со статусом online, но поставить ОС(CentOS 5.6, Debian 6) не получается, система не определяет диск.
Гуглил, вот что нашел:
http://gostroy.org.ua/panser/install/li ... er_drivers
и
http://asteriskpbx.ru/pages/viewpage.ac ... Id=1737103
Так же нашел драйвера на сайте производителя:
http://downloadcenter.intel.com/Detail_ ... iid=dc_rss
Но не силен в сборке ядер, подскажите в какую сторону стоит копать?
Спасибо
Гуглил, вот что нашел:
http://gostroy.org.ua/panser/install/li ... er_drivers
и
http://asteriskpbx.ru/pages/viewpage.ac ... Id=1737103
Так же нашел драйвера на сайте производителя:
http://downloadcenter.intel.com/Detail_ ... iid=dc_rss
Но не силен в сборке ядер, подскажите в какую сторону стоит копать?
Спасибо
-
- Advanced member
- Сообщения: 83
- Зарегистрирован: 16 май 2011, 14:12
- Откуда: Нижний Новгород
Re: Не видит RAID при установке Linux
Попробуйте вот этот драйвер из приведенной вами ссылки на сайте производителя megasr-14.00.1203.2010-1-rhel50-u5-all.img (для ОС Centos 5.6), при этом воспользуйтесь инструкцией на Red Hat http://downloadmirror.intel.com/18570/e ... Readme.txt ищите пункт 3.1.3 Installing RHEL5 (with or without Update 1, Update 2, Update 3, Update 4, Update 5) on RAIDTonych писал(а):Добрый день. Купили сервер iRU Rock 1104R c контроллером RAID Intel Original SASMF8I на борту. Создал массив в raid 10 из 4х SATA, при загрузке сервера raid определяется со статусом online, но поставить ОС(CentOS 5.6, Debian 6) не получается, система не определяет диск.
Гуглил, вот что нашел:
http://gostroy.org.ua/panser/install/li ... er_drivers
и
http://asteriskpbx.ru/pages/viewpage.ac ... Id=1737103
Так же нашел драйвера на сайте производителя:
http://downloadcenter.intel.com/Detail_ ... iid=dc_rss
Но не силен в сборке ядер, подскажите в какую сторону стоит копать?
Спасибо
Re: Не видит RAID при установке Linux
Пробовал и centos и rhel, не видит рейда все равно. Хотя драйвер на внешнем диске находит и подгружает.
-
- Advanced member
- Сообщения: 83
- Зарегистрирован: 16 май 2011, 14:12
- Откуда: Нижний Новгород
Re: Не видит RAID при установке Linux
Вы делаете все строго по инструкции?Tonych писал(а):Пробовал и centos и rhel, не видит рейда все равно. Хотя драйвер на внешнем диске находит и подгружает.
1) Create a RAID array using the Intel(R) Embedded Server RAID Technology II RAID BIOS Console.
2) Connect USB floppy drive and insert the floppy disk with RAID driver
3) Boot your system using RHEL5.0 DVD
4) At boot prompt type "linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4"
5) And then you'll see a page that shows "loading usb-storage driver", and then it will ask you "Do you have a driver disk". Choose "Yes"
6) Then it will ask you which one do you choose as a driver disk, choose "sda" which is the USB floppy disk. And then click OK to continue, you'll see the message "Reading driver disk", after it finishes, it will ask "Do you wish to load any more driver disks?" choose No if you do not have any more driver to load.
7) (If XEN mode feature is needed, the OS installatng KEY is necessary and then XEN software package needs to be loaded) Then continue with the RHEL automatic installation, you can see that in the page where we select drives to use for installation, you can only see 1 disk (Intel MegaSR), this means the raid is recognized.
8 ) At the last step of the installation (after all the packages are installed) RHEL5 prompts you to reboot. Do not click reboot button. Press Ctr+Alt+F2 to go to the text console prompt.
9) type "cat /proc/partitions" you will see some info about the partition. For example, you might find several rows, one row might include sdb. You might find like this
major minor #blocks name
8 16 1440 sdb
(In case cannot find 1440 under #blocks column, may need to remove and reinsert the USB floppy drive, then to run "cat /proc/partitions" again.)
10) type "mknod /dev/sdb b 8 16" (8 and 16 are copied from the major and minor numbers in step #9, so that the numbers could change according to what is seen in step #9)
11) type "mkdir /temp"
12) type "mount /dev/sdb /temp"
13) type "ls /temp" and you can find all the driver files are now in /temp
14) Use cd command to enter /temp directory
15) type "./replace_ahci.sh" to execute the script. It will remove ahci from /etc/modprobe.conf and blacklist ahci in /etc/modprobe.d/blacklist (replace_ahci.sh is also an example, and please implement the script even if the *.sh is with other name).
16) Go back to graphic screen and reboot the system in order to finish the installation.
Re: Не видит RAID при установке Linux
До это пункта все идет нормально:Александр Давыдов писал(а):Вы делаете все строго по инструкции?Tonych писал(а):Пробовал и centos и rhel, не видит рейда все равно. Хотя драйвер на внешнем диске находит и подгружает.
7) (If XEN mode feature is needed, the OS installatng KEY is necessary and then XEN software package needs to be loaded) Then continue with the RHEL automatic installation, you can see that in the page where we select drives to use for installation, you can only see 1 disk (Intel MegaSR), this means the raid is recognized.
Intel MegaSR не появляется и никакой установки естессно не происходит.
-
- Advanced member
- Сообщения: 83
- Зарегистрирован: 16 май 2011, 14:12
- Откуда: Нижний Новгород
Re: Не видит RAID при установке Linux
а дискетку с драйверами вы как подготовливали?Tonych писал(а):До это пункта все идет нормально:Александр Давыдов писал(а):Вы делаете все строго по инструкции?Tonych писал(а):Пробовал и centos и rhel, не видит рейда все равно. Хотя драйвер на внешнем диске находит и подгружает.
7) (If XEN mode feature is needed, the OS installatng KEY is necessary and then XEN software package needs to be loaded) Then continue with the RHEL automatic installation, you can see that in the page where we select drives to use for installation, you can only see 1 disk (Intel MegaSR), this means the raid is recognized.
Intel MegaSR не появляется и никакой установки естессно не происходит.
2 Prepare Installation disk(s)
2.1 Driver files are available on the CD that shipped with the product or can be downloaded from http://support.intel.com.
2.2 Create install disk(s)
User requires a system with either Microsoft Windows or a Linux based Operating System and fresh floppy diskette(s) to prepare the install disk(s). The required Installation Diskettes can be created on any system. Extract the disk image to a floppy disk using rawrite or another image extraction utility.
Re: Не видит RAID при установке Linux
Я пробовал с внешного диска ставить. Записывал и сам образ на него(в этом случае установщик не ругался) и распаковывал образ(установщик ругался). Сейчас попробуем найти флоппик, но это ппц конечно, 21 век) Сэкономили называется, не стали брать HP.
Re: Не видит RAID при установке Linux
Нашел у соседей usb-флоппик, распаковал на дискету образ, с флоппи подгрузил дрова, но рейд так и не появился, ни в rhel ни в centOs. =(Александр Давыдов писал(а): а дискетку с драйверами вы как подготовливали?
- gs
- Сотрудник Тринити
- Сообщения: 16650
- Зарегистрирован: 23 авг 2002, 17:34
- Откуда: Москва
- Контактная информация:
Re: Не видит RAID при установке Linux
Вам не кажется, что пришла пора обратиться к техподдержке поставщика/производителя?
Re: Не видит RAID при установке Linux
Ну если сегодня не решу проблему, то придется.gs писал(а):Вам не кажется, что пришла пора обратиться к техподдержке поставщика/производителя?
- gs
- Сотрудник Тринити
- Сообщения: 16650
- Зарегистрирован: 23 авг 2002, 17:34
- Откуда: Москва
- Контактная информация:
Re: Не видит RAID при установке Linux
Вообще-то с этого надо начинать
Им за это деньги плотють
Им за это деньги плотють
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 26 гостей