Всем привет!
Имеется сервер в кузове 826E1-R800LPB
Внутри корпуса 3 вентилятора, все они подключены к плате X8DTL-i
При включении сервера на бэкплайне Sas 826EL1 загорается светодиод FAN FAIL LED (и это понятно т.к. к бэкплайну ни одного вентилятора не подключено)
После загрузки сервера в утилите Adaptec SM состояние экспандера видится как Degraded и состояние вентиляторов как Malfunctioning
Можно ли как-то отключить подобную сигнализацию на бэкплайне если туда не подключены вентиляторы?
В описании на бэкплайн
http://www.supermicro.com/manuals/chassis/2U/SC826.pdf
я нашел джампер PRI_Mode4 , но что он делает в описании не сказано. Можно ли уточнить для чего он нужен?
И куда вообще правильно подключать вентиляторы к бэкплайну или к сис. плате?
Заранее спасибо!
Правильное подключение вентиляторов в 826 кузове
Модераторы: Trinity admin`s, Free-lance moderator`s
Re: Правильное подключение вентиляторов в 826 кузове
Установил джампер Remote Fan Fail Socket , светодиод FAN FAIL LED погас, но в ASM статус бэкплайна также видится как Degraded и состояние вентиляторов как Malfunctioning.
Подскажите это нормальное поведение бэкплайна и ASM?
Заранее спасибо!
Подскажите это нормальное поведение бэкплайна и ASM?
Заранее спасибо!
Re: Правильное подключение вентиляторов в 826 кузове
Мне интересно это только у меня такая проблема или это у всех такое поведение с этим бекплайном?
Вот , что мне в Адаптеке ответили
Greetings from Adaptec,
In the case of an enclosure that supports expanders and enclosure monitoring services (such as the Supermicro 826EL1), the enclosure can report itself to the controller. The fact that the enclosure is reporting a problem seems to be correct. You will need to contact Supermicro to make sure that the firmware on the enclosure is up to date and also see if there are particular steps you can follow to make sure indeed all the fans and components of the enclosure are working correctly.
The controller can only pass through or report what ever messages the enclosure sends out.in your log here is what the enclosure is sending:
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 1 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 2 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 3 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 508:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 temperature is out of the normal range.
Thank you for contacting Adaptec Technical Support
Вот , что мне в Адаптеке ответили
Greetings from Adaptec,
In the case of an enclosure that supports expanders and enclosure monitoring services (such as the Supermicro 826EL1), the enclosure can report itself to the controller. The fact that the enclosure is reporting a problem seems to be correct. You will need to contact Supermicro to make sure that the firmware on the enclosure is up to date and also see if there are particular steps you can follow to make sure indeed all the fans and components of the enclosure are working correctly.
The controller can only pass through or report what ever messages the enclosure sends out.in your log here is what the enclosure is sending:
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 1 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 2 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 504:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 fan 3 is malfunctioning.
April 29, 2010 2:01:04 PM MSD?ERR 508:A01C-S--L--?point.afa.local?controller 1, channel 2, enclosure 0 temperature is out of the normal range.
Thank you for contacting Adaptec Technical Support
Кто сейчас на конференции
Сейчас этот форум просматривают: Bing [Bot] и 37 гостей