Что имеем:
1. Плата Intel S5000PSLSATA
2. Корпус Intel SC5299BRP
3. Память Kingston 8 x 4Gb DDR2 PC5300 ECC (KVR667D2D4F5/4G)
4. Процы 2 x Quad-Core Xeon -2.5/1333/12M
5. Контроллер Intel RAID SRCSAS18E SAS
6. Корзина на 6 дисков SAS/SATA с hot-swap (AXX6DRV3GEXP)
Была проблема с сильным шумом вентиляторов постоянным миганием оранжевым Status LEDa.
Была залита прошивка PSL_10_13_2006 с помощью Intel® Deployment Assistant.
Шилось все кроме кроме корзины как и рекомендует Intel, т.е. BIOS, BMC, FRUSDR.
В процессе прошивки никаких проблем не возникало, прошивка завершилась корректно.
Теперь сама проблема:
после описанных действий плата перестала стартовать,
Status LED горит!!! оранжевым, на монитор сигнал не подается,
LEDы на задней панели мигают циклически, т.е. проходит тестов 5-8 и все повторяется по кругу,
такое ощущение что плата сама уходит в постоянную перезагрузку.
Пробовал запустить ее в Recovery Mode(переставлял перемычку на матери),
с резервным BIOSом мать так же не стартует, симтомы те же. Сброс BIOSа так же не дает результатов.
Как можно попытаться запустить плату, есть ли какие то шансы на ее оживление?
Короче что делать?
Неудачная прошивка S5000PSL
Модераторы: Trinity admin`s, Free-lance moderator`s
Re: Неудачная прошивка S5000PSL
Попробуйте почистить CMOS. Не поможет - в сервис.BHyK писал(а):Что имеем:
1. Плата Intel S5000PSLSATA
2. Корпус Intel SC5299BRP
3. Память Kingston 8 x 4Gb DDR2 PC5300 ECC (KVR667D2D4F5/4G)
4. Процы 2 x Quad-Core Xeon -2.5/1333/12M
5. Контроллер Intel RAID SRCSAS18E SAS
6. Корзина на 6 дисков SAS/SATA с hot-swap (AXX6DRV3GEXP)
Была проблема с сильным шумом вентиляторов постоянным миганием оранжевым Status LEDa.
Была залита прошивка PSL_10_13_2006 с помощью Intel® Deployment Assistant.
Шилось все кроме кроме корзины как и рекомендует Intel, т.е. BIOS, BMC, FRUSDR.
В процессе прошивки никаких проблем не возникало, прошивка завершилась корректно.
Теперь сама проблема:
после описанных действий плата перестала стартовать,
Status LED горит!!! оранжевым, на монитор сигнал не подается,
LEDы на задней панели мигают циклически, т.е. проходит тестов 5-8 и все повторяется по кругу,
такое ощущение что плата сама уходит в постоянную перезагрузку.
Пробовал запустить ее в Recovery Mode(переставлял перемычку на матери),
с резервным BIOSом мать так же не стартует, симтомы те же. Сброс BIOSа так же не дает результатов.
Как можно попытаться запустить плату, есть ли какие то шансы на ее оживление?
Короче что делать?
прошивку брал с сайта IntelaKLIM_SPb писал(а):Откуда вы взяли эту прошивку???Была залита прошивка PSL_10_13_2006 с помощью Intel® Deployment Assistant.
Вероятно это старая прошивка не поддерживает ваши процессоры.
Напишите подробно версии прошивок
BIOS
FRU/SDR
BMC
Можите попробовать откатить BIOS переставьте джампер J1C3
BIOS: R0066
BMC: 55
FRUSDR: FSL_39
с переставленным джампером мать ведет себя точно так же
-
KLIM_SPb
- Сотрудник Тринити
- Сообщения: 421
- Зарегистрирован: 06 май 2006, 16:33
- Откуда: СПб
- Контактная информация:
С какой версии BIOS поддерживает ваши процы?
R0087:
- Fixed: Microsoft Windows 2008* OS Install fails with BIOS 86
- Fixed: Blue Screen installing Server 2008 on S5000PSLR with R0086
- Fixed: Video capture card Blue Screens Microsoft Windows 2003*
- Fixed: BIOS cannot update when BMC in Force Update MOde
- Fixed: Legacy Console Remains Active After OS Boot
- Fixed: Date error in BMC SEL TimeStamp for year 2008
- Fixed: Input devices fail on S5000XVN entering S3 in Microsoft Windows XP*
- Fixed: WHEA - Error Record Serialization misinterpreted by Microsoft Windows 2008*
Other:
- Add SLP 2.0 Support
- Add AMISLP support for SLP 2.0
- Overlapping Memory Area fixed in PCI 3.0 implementation
- Support Infiniband Boot Type
- Not all possible P-states made available for Quad-Core Intel(R) Xeon(R) Processor 5400 series
- Sync SLIC (SLP) Table ID with Platfrom ID
- Server hangs under certain COM connection conditions
- Microcode Update(s)
06F6h CD
06F7h 69
06FBh B7
10676 60B
R0085:
- Fixed: After offline programming R0084, boot bank is not consistant
- Fixed: Processor Cache Size Mismatch Error 192 has typo
- Fixed: BIOS Setup needs to remove/add SATA Port information
- Fixed: 2 blinking cursors when entering setup under quiet boot
- Fixed: Video loss when Serial B is disabled but enabled for console redirection
- Fixed: There is an unknown device under Microsoft* Windows* 2000+SP4
- Fixed: USB mouse and keyboard detected if USB is <Disabled>
- Fixed: Performance anomolies in slot4 with Springports and EIRQ enabled
- Fixed: Northbridge shutting down PCIe link with plx device 8533 installed
- Fixed: Trouble entering opROMs that trap int 19
- Fixed: Genuine M15ERR (Accompanied by M13ERR) should have SEL log
- Fixed: Support for Harbison Refresh-2 Board
- Fixed: Use HECBASE to determine PCIE Base Addrs (Fix IBIST errors)
Other:
- Memory Reference code to 1.32
- Intel Rapid Boot Technology: Enable Video controller
- Intel Rapid Boot Technology: CSM Payload changes
R0084:
- Fixed: System will not boot with max memory (8x 4gig DIMMs- 32gigs)
- Fixed: Problem with PXE Boot with on-board NIC
- Fixed: Impossible to boot to any boot device with SRCS28X installed
- Fixed: MTRR configuration issue with G-0 processors
- Fixed: TPM is not functional on S5000XVNR
- Fixed: CLTT configuration reverting back to OLTT after Cntl+Alt+Del
- Fixed: Overheating DIMMs in CLTT
Other:
- Added support for AMIBCP Boot Order Support
R0082:
- Fixed: Unable to boot to full Linux kernel through Linux payload
- Fixed: GBE LAN cannot be detected and transfer data under DOS 7.0 (NICs fail in DOS)
- Fixed: Duplicate devices in Boot Order after CMOS clear
- Fixed: VMWare 3.0.2 ESX kernel panic during installation
- Fixed: Deep C-State support will cause W2K3 without installed service pack to fail
- Add back Altitude Bios Setup Option when OLTT selected
- Add Windows Hardware Error Architecture (WHEA) support
- Update Memory Reference code to 1.30
- Add Half Ratio support for the Quad-Core Intel(R) Xeon(R)
Processor 5400 series
- Add 10676h C-0 processor microcode for Quad-Core Intel(R) Xeon(R)
Processor 5400 series
R0081:
- Fixed: S5000XVN reboots instead of resumes from S4 under Vista
- Fixed: BIOS hangs when there is no boot targets available on the system
- Fixed: WHQL UAA test fails in Vista 64bit on S5000XVN
- Fixed: Problem with PXE Boot with on-board NIC or NIC boot under dos in BIOS R0078
- Fixed: Some SATA drives not detected on cold boot
- BIOS String Update "Add new CC3 requirements"
- Errata 100: ESB2 PCIe switch mis-formats TLPs
- MP Routing/Table Fixes
- Fix video corruption on Main tab in BIOS Setup w/console redir enabled
- Fix Unrecoverable Error Handling problems
- Fix kernel panic in Linux with throttled processors
- Loading user defaults loads invalid option on the boot order page
- Fixed garbled text in BIOS Setup at 115K baud w/console redir
- TPM Status appears in BIOS Setup on boards without TPM.
- Update ESB2 RAID OpRom to vA.01.07101204I
- Enable fake MSI for S5000PSL Slot4
- Add support of depop SKU based off of S5000PSL
- WHQL test failure on I/O Port 161 and 162
- Add 06F6h B-2 processor microcode patch M046F6C9 for the Dual-Core
- Add 06F7h B-3 processor microcode patch M406F767 for the Quad-Core
- Allow B-step/G-step mixed stepping for 5100 and 5300 series processors
R0079:
- Fixed: RHEL4/SLES9 kernel panic when Speedstep is disabled.
R0078:
- Fixed: Behavior for Boot failover from Boot Manager and Forced Boot options.
- Fixed: Boot flow so that Error Manager has priority over Boot Manager active boot.
R0077:
- Fixed: Issue where PS2 Mouse and USB Mouse will have a conflict in DOS mode.
- Fixed: SAS SW RAID appears in S5000PSLROMB when F9 is pressed in the BIOS setup menu.
- Fixed: S5000XVN board hangs with BIOS R0070 when MFG jumper installed.
- Fixed: S5000PSL will not boot to SW RAID drive with certain SATA RAID HBA's are installed.
- Fixed: System Firmware Progress #0x06 always shows twice in SEL.
- Fixed: LSI SATA RAID fails to boot when certain RAID cards are in the system.
- Fixed: MPS IRQ Table Issue.
- Fixed: S5000XVN manual sleep state fails with Microsoft* Windows* Vista Ultimate*.
- Fixed: Fixes for re-initialization on S3 Resume for HD Audio device & EHCI controller.
- Fixed: Max base of the memory resource producer range used for TPM device driver.
- Fixed: Diagnostic screen text display after HDD password prompt.
- Fixed: F9 & F10 keys cause a longer pause than with the previous version.
- Fixed: To preserve FSB0 & FSB1 Error Masks and SATA MSI Registers after S3 resume.
- Fixed: USB keyboard lock out when system is halted from three bad password attempts.
- Increase the size of the S3 Resume runtime script table.
- SMBIOS v2.5 updates with values in Type 17 for Fully-Buffered DIMM (FB-DIMM) definitions.
- Correct some logic in programming of PATA controller.
- Removal of unused parameter passed to entry point of Memory Reference Code.
- Add S1 Power Save driver.
- Turn off POST code LEDs after S3 resume.
- Add IDE Security feature to set Hard Drive Password.
- Add cc2 and cc3 support for processor power savings.
- Add platform-specific code for obtaining the size of the ACPI Reserved Memory.
- Add separate path for Processor re-initialization in PEI on S3 resume.
- Correct Memory Base Address used in PEI on S3 resume path.
- Correct display of OEM updated System Manufacturer string on POST Diag screen.
- Update to new Intel(R) Boot Agent Option ROM v1.2.45.
- Add 06F6h B-2 processor microcode patch M046F6C6 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06F7h B-3 processor microcode patch M406F766 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Correct USB detected devices string in Setup when USB controller is disabled.
- Add Support for getting SMBIOS Chassis Type Manufacturer from FRU.
- Sync BMC RTC may sometimes send BMC invalid time.
- Removal of pre-Production Beta microcode patches for processors with CPUID 06F4h, 06F5h.
- Add Case Sensitivity support to BIOS Admin/User password.
- Add support for new Dual-Core & Quad-Core Processor Family/Model.
- Add warning message to Error Manager if Processor and Chipset configuration is unsupported.
- Add control for PXE ROM setup options on a per-port basis.
- Add 06FBh processor microcode patch M046FBB4 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06FBh processor microcode patch M406FBB4 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Add FATAL error when booting baseboard with voltage mismatch for processor.
- Add Watchdog timer coverage of OpROMs.
- Correct CPUID procedure call used for S3 resume path.
- Increase BSP timout value waiting for AP to get into SMM.
- Resolve Data Parity Check failure with certain PCI-e Devices.
- Add ability to remove items from the Boot Order.
- Add suppressed setup option to remove the EFI Shell from the system boot option order.
- Add initial Platform ID support for S5000PSLSATAD SKU.
- Add fix for Console Redirection Menu Options Incorrecly Supressed in Some Cases.
- Correct SMBIOS Type 24 "Hardware Security Settings".
- Implement Workaround for Chipset Sighting #501436.
- Ensure all boot options in DefaultLegacyDevOrder are enabled for F9 defaults.
R0076:
- Fixed: Potential processor marginality issue
- Fixed: Additional S3 corrections for S5000XVN server boards
- Add microcode updates M046F6C6 and M406F766 to eliminate a potential source of unpredictable system behavior
R0075:
- Fixed Re-initialization on S3 Resume for HD Audio device & EHCI controller.
- Fixed Some logic in programming of PATA controller.
Removal of unused parameter passed to entry point of Memory Reference Code.
- Fixed Turn off POST code LEDs after S3 resume.
- Fixed Memory Base Address used in PEI on S3 resume path.
- Fixed Max base of the memory resource producer range used for TPM device driver.
- Increased the size of the S3 Resume runtime script table.
- SMBIOS v2.5 updates with values in Type 17 for Fully-Buffered DIMM (FB-DIMM) definitions.
- Add platform-specific code for obtaining the size of the ACPI Reserved Memory.
- Add separate path for Processor re-initialization in PEI on S3 resume.
R0074:
- Fixed SuSe* SLES 9 64bit SP2 can't reset and shut down normally.
- Fixed SuSe* SLES 9.0 SP2 32bit and 64bit boot failed with Quad-Core Intel(R) Xeon(R)
Processor 5300 series B1 stepping CPU.
- Fixed When enabled, Console Redirection will sometimes show system "Boot Failure".
- Fixed Issue retaining USB device boot order.
- Fixed Red Hat* RHEL 40 U4 OS Stalls and CPU IERR's are reported running custom reboot test.
- Fixed System hang during post (0xE4h).
- Fixed Sparing mode can't be set when DIMMs are just installed in one channel.
- Fixed System with 2x Quad-Core Intel(R) Xeon(R) Processor 5300 series with 1333FSB
reports kernel panic after installing Red Hat RH4_U4_EM64T.
- Fixed Component error in Error manager.
- Fixed Unable to configure Processor retest from SYSCFG.
- Fixed Resume from S3 to S0 state does not always retain APM status port register 0xB3.
- Fixed HDD Boot drive drops to bottom of order when USB key is set to 1st device.
- Fixed Quantum* DLT tape drive not seen with LSI 8408E SAS RAID.
- Fixed S3 resume failed when SATA mode is set as "Legacy -> SATA Only".
- Fixed Corrected Errors in ACPI _PSS for calculation of "power" field.
- Fixed EFI Shell corrected to properly map CD-ROM as file system from SATA CD/DVD-ROM drive.
- Fixed Corrected issue for USB floppy failure when connected behind a USB 2.0 hub.
- Fixed Corrected a race condition present in the SMI dispatcher code.
- Fixed Corrected UltraDMA 5 timing values in ACPI tables.
- Fixed Corrected behavior for clock sync events.
- Add ACPI IPMI Support for Exposing BMC resources via ACPI.
- Update AMIBCP with added support for "Access/Use" feature.
- Included additional escape sequence handling of F11 & F12 keys for terminal emulation.
- Update _PSS package number of elements to match the unique number of P-states.
- Update to Change Logo utility to version 4.19.
- Update AMI Copyright string for 2007.
- Update AMI CSM16 (Compatibility Support Module) to version 33.
- SMBIOS Type 17 enhancements for populating the Manufacturer ID, Serial Number,
and Asset Tag fields from the SPD.
- SMBIOS Type 17 enhancements towards new FB-DIMM definitions in SMBIOS version 2.5.
- USB devices sorted to highest boot priority within their device type.
- Included modifications for S3 support.
- Include new "Boot Option Retry" feature and setup option.
- Updates for Intel(R) 5000 Series MCH BIOS Specification Update Revision 1.01.
- Updates for ESB2 ICH BIOS Specification Update Revision 0.78.
- Update to new ESB2 RAID Option ROM vA.01.01021804I
- Additional PCI-E port clock configuration and ESB2 BIOS Spec update changes.
- Save additional registers to Runtime table for restore on S3 resume.
R0070:
- Fixed Get system Restart cause returns incorrect response in certain scenarios.
- Fixed Add-in cards not getting set up in PCIe* slot 4
- Fixed Can't press "F12" for Network Boot during Boot Timeout count down in POST.
- Fixed System has no beep code after two processors with mismatched FSB's are installed.
Other:
- Implement common PlatformIdentify support to read and publish Platform SKU ID.
- Fix support for IPMI Get System Boot Options command.
- Fix support for IPMI Set Serial MUX command.
- Add 06F9h E-0 processor microcode patch M046F982 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06F9h E-0 processor microcode patch M406F984 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Update to Intel(R) 5000 Series Chipset Memory Reference Code v1.21 patch.
- Fix support for IPMI Set Processor TControl command.
R0068:
- Fixed Failing DIMM (2A) causes DIMM 1A to be marked bad / hang system.
- Fixed Failing DIMM 2A not logged in SEL.
- Fixed S3 does not work properly on S5000XVN workstation SAS.
- Fixed No [F12] support for PXE boot.
- Fixed When Console Redirection is enabled, sometimes the system can't detect USB key.
- Fixed When Console Redirection is enabled, sometimes the system will show "Boot Failure".
- Fixed Patrol Scrubbing not enabled.
- Fixed PEX_FAT_FERR: ESI Reset Time-Out.
- Fixed SPMICmd_SetProcessorTControl command is not sent for processor 2 by BIOS to BMC.
- Fixed Cert-WHQL ACPI Sleep tested failed.(Workstation SATA).
- Fixed RTC fails century rollover.
OTHER:
- Fix PCI-E Swizzle support for future platform porting.
- Update to Intel(R) 5000 Series Chipset Memory Reference Code v1.20.
- Enable Patrol Scrubbing for Intel(R) 5000 Series Chipset G1 stepping and later.
- Update to latest EPCS (EFI Platform Configuration Script) Utilities.
- Improved code flow for hiding COM port from OS in the case of SOL or LOSR.
- Server Management Optimization support changes.
- Rolling BIOS fix for rare infinite resets.
- Map out Electrically Isolated DIMMs on Truncated Channels.
- Update to new ESB2 RAID Option ROM vA.01.10241435I
- Enhancements for Optimization of Maximum Read Request Sizes of PCI-e Devices.
- Add AMI BIOS Configuration Program (BCP) v2.6 Support.
- Add setup option for "FSB High Bandwidth Optimization".
- Fix PERR enable bit not preserved in PCICMD register of SATA controller.
R0066:
- Fixed issue where OEM Change Logo Utility may cause BIOS corruption.
OTHER:
- Fix PIRQ routing for PCI-E Swizzle support on S5000PSL.
Этот биос не поддерживает ваши процессоры :)
// Меняем процессоры на более старые и прошиваем до последней прошивки
R0087:
- Fixed: Microsoft Windows 2008* OS Install fails with BIOS 86
- Fixed: Blue Screen installing Server 2008 on S5000PSLR with R0086
- Fixed: Video capture card Blue Screens Microsoft Windows 2003*
- Fixed: BIOS cannot update when BMC in Force Update MOde
- Fixed: Legacy Console Remains Active After OS Boot
- Fixed: Date error in BMC SEL TimeStamp for year 2008
- Fixed: Input devices fail on S5000XVN entering S3 in Microsoft Windows XP*
- Fixed: WHEA - Error Record Serialization misinterpreted by Microsoft Windows 2008*
Other:
- Add SLP 2.0 Support
- Add AMISLP support for SLP 2.0
- Overlapping Memory Area fixed in PCI 3.0 implementation
- Support Infiniband Boot Type
- Not all possible P-states made available for Quad-Core Intel(R) Xeon(R) Processor 5400 series
- Sync SLIC (SLP) Table ID with Platfrom ID
- Server hangs under certain COM connection conditions
- Microcode Update(s)
06F6h CD
06F7h 69
06FBh B7
10676 60B
R0085:
- Fixed: After offline programming R0084, boot bank is not consistant
- Fixed: Processor Cache Size Mismatch Error 192 has typo
- Fixed: BIOS Setup needs to remove/add SATA Port information
- Fixed: 2 blinking cursors when entering setup under quiet boot
- Fixed: Video loss when Serial B is disabled but enabled for console redirection
- Fixed: There is an unknown device under Microsoft* Windows* 2000+SP4
- Fixed: USB mouse and keyboard detected if USB is <Disabled>
- Fixed: Performance anomolies in slot4 with Springports and EIRQ enabled
- Fixed: Northbridge shutting down PCIe link with plx device 8533 installed
- Fixed: Trouble entering opROMs that trap int 19
- Fixed: Genuine M15ERR (Accompanied by M13ERR) should have SEL log
- Fixed: Support for Harbison Refresh-2 Board
- Fixed: Use HECBASE to determine PCIE Base Addrs (Fix IBIST errors)
Other:
- Memory Reference code to 1.32
- Intel Rapid Boot Technology: Enable Video controller
- Intel Rapid Boot Technology: CSM Payload changes
R0084:
- Fixed: System will not boot with max memory (8x 4gig DIMMs- 32gigs)
- Fixed: Problem with PXE Boot with on-board NIC
- Fixed: Impossible to boot to any boot device with SRCS28X installed
- Fixed: MTRR configuration issue with G-0 processors
- Fixed: TPM is not functional on S5000XVNR
- Fixed: CLTT configuration reverting back to OLTT after Cntl+Alt+Del
- Fixed: Overheating DIMMs in CLTT
Other:
- Added support for AMIBCP Boot Order Support
R0082:
- Fixed: Unable to boot to full Linux kernel through Linux payload
- Fixed: GBE LAN cannot be detected and transfer data under DOS 7.0 (NICs fail in DOS)
- Fixed: Duplicate devices in Boot Order after CMOS clear
- Fixed: VMWare 3.0.2 ESX kernel panic during installation
- Fixed: Deep C-State support will cause W2K3 without installed service pack to fail
- Add back Altitude Bios Setup Option when OLTT selected
- Add Windows Hardware Error Architecture (WHEA) support
- Update Memory Reference code to 1.30
- Add Half Ratio support for the Quad-Core Intel(R) Xeon(R)
Processor 5400 series
- Add 10676h C-0 processor microcode for Quad-Core Intel(R) Xeon(R)
Processor 5400 series
R0081:
- Fixed: S5000XVN reboots instead of resumes from S4 under Vista
- Fixed: BIOS hangs when there is no boot targets available on the system
- Fixed: WHQL UAA test fails in Vista 64bit on S5000XVN
- Fixed: Problem with PXE Boot with on-board NIC or NIC boot under dos in BIOS R0078
- Fixed: Some SATA drives not detected on cold boot
- BIOS String Update "Add new CC3 requirements"
- Errata 100: ESB2 PCIe switch mis-formats TLPs
- MP Routing/Table Fixes
- Fix video corruption on Main tab in BIOS Setup w/console redir enabled
- Fix Unrecoverable Error Handling problems
- Fix kernel panic in Linux with throttled processors
- Loading user defaults loads invalid option on the boot order page
- Fixed garbled text in BIOS Setup at 115K baud w/console redir
- TPM Status appears in BIOS Setup on boards without TPM.
- Update ESB2 RAID OpRom to vA.01.07101204I
- Enable fake MSI for S5000PSL Slot4
- Add support of depop SKU based off of S5000PSL
- WHQL test failure on I/O Port 161 and 162
- Add 06F6h B-2 processor microcode patch M046F6C9 for the Dual-Core
- Add 06F7h B-3 processor microcode patch M406F767 for the Quad-Core
- Allow B-step/G-step mixed stepping for 5100 and 5300 series processors
R0079:
- Fixed: RHEL4/SLES9 kernel panic when Speedstep is disabled.
R0078:
- Fixed: Behavior for Boot failover from Boot Manager and Forced Boot options.
- Fixed: Boot flow so that Error Manager has priority over Boot Manager active boot.
R0077:
- Fixed: Issue where PS2 Mouse and USB Mouse will have a conflict in DOS mode.
- Fixed: SAS SW RAID appears in S5000PSLROMB when F9 is pressed in the BIOS setup menu.
- Fixed: S5000XVN board hangs with BIOS R0070 when MFG jumper installed.
- Fixed: S5000PSL will not boot to SW RAID drive with certain SATA RAID HBA's are installed.
- Fixed: System Firmware Progress #0x06 always shows twice in SEL.
- Fixed: LSI SATA RAID fails to boot when certain RAID cards are in the system.
- Fixed: MPS IRQ Table Issue.
- Fixed: S5000XVN manual sleep state fails with Microsoft* Windows* Vista Ultimate*.
- Fixed: Fixes for re-initialization on S3 Resume for HD Audio device & EHCI controller.
- Fixed: Max base of the memory resource producer range used for TPM device driver.
- Fixed: Diagnostic screen text display after HDD password prompt.
- Fixed: F9 & F10 keys cause a longer pause than with the previous version.
- Fixed: To preserve FSB0 & FSB1 Error Masks and SATA MSI Registers after S3 resume.
- Fixed: USB keyboard lock out when system is halted from three bad password attempts.
- Increase the size of the S3 Resume runtime script table.
- SMBIOS v2.5 updates with values in Type 17 for Fully-Buffered DIMM (FB-DIMM) definitions.
- Correct some logic in programming of PATA controller.
- Removal of unused parameter passed to entry point of Memory Reference Code.
- Add S1 Power Save driver.
- Turn off POST code LEDs after S3 resume.
- Add IDE Security feature to set Hard Drive Password.
- Add cc2 and cc3 support for processor power savings.
- Add platform-specific code for obtaining the size of the ACPI Reserved Memory.
- Add separate path for Processor re-initialization in PEI on S3 resume.
- Correct Memory Base Address used in PEI on S3 resume path.
- Correct display of OEM updated System Manufacturer string on POST Diag screen.
- Update to new Intel(R) Boot Agent Option ROM v1.2.45.
- Add 06F6h B-2 processor microcode patch M046F6C6 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06F7h B-3 processor microcode patch M406F766 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Correct USB detected devices string in Setup when USB controller is disabled.
- Add Support for getting SMBIOS Chassis Type Manufacturer from FRU.
- Sync BMC RTC may sometimes send BMC invalid time.
- Removal of pre-Production Beta microcode patches for processors with CPUID 06F4h, 06F5h.
- Add Case Sensitivity support to BIOS Admin/User password.
- Add support for new Dual-Core & Quad-Core Processor Family/Model.
- Add warning message to Error Manager if Processor and Chipset configuration is unsupported.
- Add control for PXE ROM setup options on a per-port basis.
- Add 06FBh processor microcode patch M046FBB4 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06FBh processor microcode patch M406FBB4 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Add FATAL error when booting baseboard with voltage mismatch for processor.
- Add Watchdog timer coverage of OpROMs.
- Correct CPUID procedure call used for S3 resume path.
- Increase BSP timout value waiting for AP to get into SMM.
- Resolve Data Parity Check failure with certain PCI-e Devices.
- Add ability to remove items from the Boot Order.
- Add suppressed setup option to remove the EFI Shell from the system boot option order.
- Add initial Platform ID support for S5000PSLSATAD SKU.
- Add fix for Console Redirection Menu Options Incorrecly Supressed in Some Cases.
- Correct SMBIOS Type 24 "Hardware Security Settings".
- Implement Workaround for Chipset Sighting #501436.
- Ensure all boot options in DefaultLegacyDevOrder are enabled for F9 defaults.
R0076:
- Fixed: Potential processor marginality issue
- Fixed: Additional S3 corrections for S5000XVN server boards
- Add microcode updates M046F6C6 and M406F766 to eliminate a potential source of unpredictable system behavior
R0075:
- Fixed Re-initialization on S3 Resume for HD Audio device & EHCI controller.
- Fixed Some logic in programming of PATA controller.
Removal of unused parameter passed to entry point of Memory Reference Code.
- Fixed Turn off POST code LEDs after S3 resume.
- Fixed Memory Base Address used in PEI on S3 resume path.
- Fixed Max base of the memory resource producer range used for TPM device driver.
- Increased the size of the S3 Resume runtime script table.
- SMBIOS v2.5 updates with values in Type 17 for Fully-Buffered DIMM (FB-DIMM) definitions.
- Add platform-specific code for obtaining the size of the ACPI Reserved Memory.
- Add separate path for Processor re-initialization in PEI on S3 resume.
R0074:
- Fixed SuSe* SLES 9 64bit SP2 can't reset and shut down normally.
- Fixed SuSe* SLES 9.0 SP2 32bit and 64bit boot failed with Quad-Core Intel(R) Xeon(R)
Processor 5300 series B1 stepping CPU.
- Fixed When enabled, Console Redirection will sometimes show system "Boot Failure".
- Fixed Issue retaining USB device boot order.
- Fixed Red Hat* RHEL 40 U4 OS Stalls and CPU IERR's are reported running custom reboot test.
- Fixed System hang during post (0xE4h).
- Fixed Sparing mode can't be set when DIMMs are just installed in one channel.
- Fixed System with 2x Quad-Core Intel(R) Xeon(R) Processor 5300 series with 1333FSB
reports kernel panic after installing Red Hat RH4_U4_EM64T.
- Fixed Component error in Error manager.
- Fixed Unable to configure Processor retest from SYSCFG.
- Fixed Resume from S3 to S0 state does not always retain APM status port register 0xB3.
- Fixed HDD Boot drive drops to bottom of order when USB key is set to 1st device.
- Fixed Quantum* DLT tape drive not seen with LSI 8408E SAS RAID.
- Fixed S3 resume failed when SATA mode is set as "Legacy -> SATA Only".
- Fixed Corrected Errors in ACPI _PSS for calculation of "power" field.
- Fixed EFI Shell corrected to properly map CD-ROM as file system from SATA CD/DVD-ROM drive.
- Fixed Corrected issue for USB floppy failure when connected behind a USB 2.0 hub.
- Fixed Corrected a race condition present in the SMI dispatcher code.
- Fixed Corrected UltraDMA 5 timing values in ACPI tables.
- Fixed Corrected behavior for clock sync events.
- Add ACPI IPMI Support for Exposing BMC resources via ACPI.
- Update AMIBCP with added support for "Access/Use" feature.
- Included additional escape sequence handling of F11 & F12 keys for terminal emulation.
- Update _PSS package number of elements to match the unique number of P-states.
- Update to Change Logo utility to version 4.19.
- Update AMI Copyright string for 2007.
- Update AMI CSM16 (Compatibility Support Module) to version 33.
- SMBIOS Type 17 enhancements for populating the Manufacturer ID, Serial Number,
and Asset Tag fields from the SPD.
- SMBIOS Type 17 enhancements towards new FB-DIMM definitions in SMBIOS version 2.5.
- USB devices sorted to highest boot priority within their device type.
- Included modifications for S3 support.
- Include new "Boot Option Retry" feature and setup option.
- Updates for Intel(R) 5000 Series MCH BIOS Specification Update Revision 1.01.
- Updates for ESB2 ICH BIOS Specification Update Revision 0.78.
- Update to new ESB2 RAID Option ROM vA.01.01021804I
- Additional PCI-E port clock configuration and ESB2 BIOS Spec update changes.
- Save additional registers to Runtime table for restore on S3 resume.
R0070:
- Fixed Get system Restart cause returns incorrect response in certain scenarios.
- Fixed Add-in cards not getting set up in PCIe* slot 4
- Fixed Can't press "F12" for Network Boot during Boot Timeout count down in POST.
- Fixed System has no beep code after two processors with mismatched FSB's are installed.
Other:
- Implement common PlatformIdentify support to read and publish Platform SKU ID.
- Fix support for IPMI Get System Boot Options command.
- Fix support for IPMI Set Serial MUX command.
- Add 06F9h E-0 processor microcode patch M046F982 for the Dual-Core Intel(R) Xeon(R) Processor 5100 series.
- Add 06F9h E-0 processor microcode patch M406F984 for the Quad-Core Intel(R) Xeon(R) Processor 5300 series.
- Update to Intel(R) 5000 Series Chipset Memory Reference Code v1.21 patch.
- Fix support for IPMI Set Processor TControl command.
R0068:
- Fixed Failing DIMM (2A) causes DIMM 1A to be marked bad / hang system.
- Fixed Failing DIMM 2A not logged in SEL.
- Fixed S3 does not work properly on S5000XVN workstation SAS.
- Fixed No [F12] support for PXE boot.
- Fixed When Console Redirection is enabled, sometimes the system can't detect USB key.
- Fixed When Console Redirection is enabled, sometimes the system will show "Boot Failure".
- Fixed Patrol Scrubbing not enabled.
- Fixed PEX_FAT_FERR: ESI Reset Time-Out.
- Fixed SPMICmd_SetProcessorTControl command is not sent for processor 2 by BIOS to BMC.
- Fixed Cert-WHQL ACPI Sleep tested failed.(Workstation SATA).
- Fixed RTC fails century rollover.
OTHER:
- Fix PCI-E Swizzle support for future platform porting.
- Update to Intel(R) 5000 Series Chipset Memory Reference Code v1.20.
- Enable Patrol Scrubbing for Intel(R) 5000 Series Chipset G1 stepping and later.
- Update to latest EPCS (EFI Platform Configuration Script) Utilities.
- Improved code flow for hiding COM port from OS in the case of SOL or LOSR.
- Server Management Optimization support changes.
- Rolling BIOS fix for rare infinite resets.
- Map out Electrically Isolated DIMMs on Truncated Channels.
- Update to new ESB2 RAID Option ROM vA.01.10241435I
- Enhancements for Optimization of Maximum Read Request Sizes of PCI-e Devices.
- Add AMI BIOS Configuration Program (BCP) v2.6 Support.
- Add setup option for "FSB High Bandwidth Optimization".
- Fix PERR enable bit not preserved in PCICMD register of SATA controller.
R0066:
- Fixed issue where OEM Change Logo Utility may cause BIOS corruption.
OTHER:
- Fix PIRQ routing for PCI-E Swizzle support on S5000PSL.
Этот биос не поддерживает ваши процессоры :)
// Меняем процессоры на более старые и прошиваем до последней прошивки
Да, такие же процессоры. Тоже самое обновление точно так же делал. Терь сервак не стартует. Симптомы те же. Вопрос у меня такой, какой процессор сейчас нужен))) что бы вернуть сервер к жизни, какие процессоры поддерживает БИОС 66. И второй вопрос, обязательно ли ставить два процессора или будет достаточно одного?KLIM_SPb писал(а):Точное название процессоров?
Какой именно бред?KLIM_SPb писал(а):Меня очень интересует вопрос: кто вам посоветовал такой бред
Просто 3 человека за 3 недели, как-то много...
Обновлял через вот эту вещь Intel® Deployment Assistant ставил обновление ссайта, это обновление было помеченно как рекомендуемое, извиняюсь не допёр посмотреть всё про БИОС)))
Последний раз редактировалось ChuVi 23 апр 2008, 16:11, всего редактировалось 1 раз.
Klim спасибо за совет, но решилось немного не так. Вообщем когда я перекинул перемычку на банк 0 биоса, грузиться он отказывался, в отчаянье (так как подходящий проц я хрен бы где нашёл на время) вытящил батарейку и отстал от сервера на 2 дня, сегодня попробывал врубить и он заработал)))) Ещё раз спасибо. Вследущий раз буду оч. внимательно смотреть чем я прошиваю. Всех с пятницей)))
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 28 гостей